DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 74101-399-51 Gate DriverBoard kit is made for the Allen-Bradley 1336 Plus, Plus II, Impact, and Force AC Drives. It is compatible with D Frame 1336 drives with 230 Volts AC voltage ratings and 60 Horsepower output ratings.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 74101-399-51. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 74101-399-51 |
Description | Gate Driver Board |
Voltage | 230 Volts AC |
Power Rating | 60 Horsepower |
Frame | D |
Units of Kits Per Drive | 1 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 74101-399-51 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 74101-399-51 units instead of migration.
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 74101-399-51 |
Description | Gate Driver Board |
Voltage | 230 Volts AC |
Power Rating | 60 Horsepower |
Frame | D |
Units of Kits Per Drive | 1 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 74101-399-51 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 74101-399-51 units instead of migration.
sThe Allen-Bradley 74101-399-51 Gate DriverBoard is a spare part assembly kit for the Allen-Bradley 1336 Plus, Plus II, Impact, and Force digital AC drive series. This assembly kit contains 1 gate drive board spare part and a mounting plate. This board is positioned between the main control board and the driver chassis base. It is built as a spare part for the 1336 Plus II (F), Plus (S), Force (T) and Impact (E) AC digital AC drives with a 230 Volts AC voltage rating and a 60 Horsepower nominal output power rating. The board is compatible with the D Frame drives in these drive families and it is installed in drives with or without an enclosure. The 74101-399-51 Gate Drive Board can be installed on the drive's main chassis bracket via the following 6 simple steps.
First, remove the enclosure if there is one and turn off the power to the drive. Second, check for the absence of control voltage on the TB1 positive and negative terminals (+DC and -DC). Third, unfasten the main control board from the chassis (use a troubleshooting guide like the 1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2 manuals). Fourth, disconnect the jumper connector on the old board and remove the old board. Fifth, install the new gate drive board on the main chassis bracket and connect the jumper connectors to it. Finally, fasten the main control board back onto the chassis and reconnect power. More information on the installation, testing, and removal of the gate drive board can be found in the 1336 FORCE-6.2, 1336 IMPACT-6.2, or 1336 PLUS-6.2 troubleshooting guides.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 74101-399-51. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 74101-399-51 |
Description | Gate Driver Board |
Voltage | 230 Volts AC |
Power Rating | 60 Horsepower |
Frame | D |
Units of Kits Per Drive | 1 |
Product Lifecycle Status* | Discontinued/Obsolete |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 PCB Boards |
Part Number | 74101-399-51 |
Description | Gate Driver Board |
Voltage | 230 Volts AC |
Power Rating | 60 Horsepower |
Frame | D |
Units of Kits Per Drive | 1 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 74101-399-51 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 74101-399-51 units instead of migration.
The Allen-Bradley 74101-399-51 Gate DriverBoard is a spare part assembly kit for the Allen-Bradley 1336 Plus, Plus II, Impact, and Force digital AC drive series. This assembly kit contains 1 gate drive board spare part and a mounting plate. This board is positioned between the main control board and the driver chassis base. It is built as a spare part for the 1336 Plus II (F), Plus (S), Force (T) and Impact (E) AC digital AC drives with a 230 Volts AC voltage rating and a 60 Horsepower nominal output power rating. The board is compatible with the D Frame drives in these drive families and it is installed in drives with or without an enclosure. The 74101-399-51 Gate Drive Board can be installed on the drive's main chassis bracket via the following 6 simple steps.
First, remove the enclosure if there is one and turn off the power to the drive. Second, check for the absence of control voltage on the TB1 positive and negative terminals (+DC and -DC). Third, unfasten the main control board from the chassis (use a troubleshooting guide like the 1336 IMPACT-6.2, 1336 FORCE-6.2, or 1336 PLUS-6.2 manuals). Fourth, disconnect the jumper connector on the old board and remove the old board. Fifth, install the new gate drive board on the main chassis bracket and connect the jumper connectors to it. Finally, fasten the main control board back onto the chassis and reconnect power. More information on the installation, testing, and removal of the gate drive board can be found in the 1336 FORCE-6.2, 1336 IMPACT-6.2, or 1336 PLUS-6.2 troubleshooting guides.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 74101-399-51. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 74101-399-51. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.