DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 74101-482-62. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 74101-482-62 |
Description | PCB Gate Drive Board |
Voltage | 460V AC |
Horsepower | X60 HP |
Frame Model | A,B,C,D, or E |
Alternative Part Number | 1336-BDB-SP19D |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 74101-482-62 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 74101-482-62 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 74101-482-62 |
Description | PCB Gate Drive Board |
Voltage | 460V AC |
Horsepower | X60 HP |
Frame Model | A,B,C,D, or E |
Alternative Part Number | 1336-BDB-SP19D |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 74101-482-62 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 74101-482-62 units instead of migration.
sThe 74101-482-62 PCB Gate Drive Board by Allen-Bradley is a PCB gate driver board for the Allen-Bradley 1336 PLUS, FORCE, IMPACT, and REGEN Drives with 480V AC operating voltage and a 60HP drive output rating. The gate driver board is located under the main control board, and it is directly attached to the main control board mounting plate, and it helps to amplify low input current from the power supply board. The 74101-482-62 PCB Gate Drive Board connects to the main control board, and other boards using its J2, J6, J7, J8, J9, J10, and J13 Jumper connectors, and it uses the Terminal Strip TB4 for 24V DC auxiliary input voltage.
The 74101-482-62 PCB Gate Drive Board is installed on the main control board mounting plate by placing the board on the mounting plate and by tightening the 8 standoff screws that are included with the PCB and which have a 26lb-in (3N-m) fastening torque. Tighten the screws in ¼ turn in a clockwise direction, thereby fastening the 74101-482-62 PCB Gate Drive Board to the mounting plate. The Jumper connectors J2 and J13 are then attached and the Terminal Base TB4 is connected to the gate driver board. The 74101-482-62 can be tested for optimum working conditions by using a specialized meter system, and during the test, the fuses F1 and F3 are tested for open conditions, and the test will show if the 74101-482-62 PCB Gate Drive Board is in good condition or if it needs to be replaced. Each module fits effectively with frame sizes: A, B, C, D, or E. This module has an alternative part number 1336-BDB-SP19D.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Please refer to the manual for more information about the 74101-482-62 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
74101-482-62 Ser A
|
74101-482-62/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 74101-482-62 |
Description | PCB Gate Drive Board |
Voltage | 460V AC |
Horsepower | X60 HP |
Frame Model | A,B,C,D, or E |
Alternative Part Number | 1336-BDB-SP19D |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 74101-482-62 |
Description | PCB Gate Drive Board |
Voltage | 460V AC |
Horsepower | X60 HP |
Frame Model | A,B,C,D, or E |
Alternative Part Number | 1336-BDB-SP19D |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 74101-482-62 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 74101-482-62 units instead of migration.
The 74101-482-62 PCB Gate Drive Board by Allen-Bradley is a PCB gate driver board for the Allen-Bradley 1336 PLUS, FORCE, IMPACT, and REGEN Drives with 480V AC operating voltage and a 60HP drive output rating. The gate driver board is located under the main control board, and it is directly attached to the main control board mounting plate, and it helps to amplify low input current from the power supply board. The 74101-482-62 PCB Gate Drive Board connects to the main control board, and other boards using its J2, J6, J7, J8, J9, J10, and J13 Jumper connectors, and it uses the Terminal Strip TB4 for 24V DC auxiliary input voltage.
The 74101-482-62 PCB Gate Drive Board is installed on the main control board mounting plate by placing the board on the mounting plate and by tightening the 8 standoff screws that are included with the PCB and which have a 26lb-in (3N-m) fastening torque. Tighten the screws in ¼ turn in a clockwise direction, thereby fastening the 74101-482-62 PCB Gate Drive Board to the mounting plate. The Jumper connectors J2 and J13 are then attached and the Terminal Base TB4 is connected to the gate driver board. The 74101-482-62 can be tested for optimum working conditions by using a specialized meter system, and during the test, the fuses F1 and F3 are tested for open conditions, and the test will show if the 74101-482-62 PCB Gate Drive Board is in good condition or if it needs to be replaced. Each module fits effectively with frame sizes: A, B, C, D, or E. This module has an alternative part number 1336-BDB-SP19D.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Please refer to the manual for more information about the 74101-482-62 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
74101-482-62 Ser A
|
74101-482-62/A, Series A, Rev A | Request Quote |