74101-582-52 | Allen Bradley Drives 1336 PCB Boards

74101-582-52

Rated 4.7 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

74101-582-52

Description: The Allen-Bradley 74101-582-52  PCB (Printed Circuit Board) or Gate Drive Board kit is made for the Allen-Bradley 1336 Plus and Force AC Drives. It is compatible with B-Frame 1336 Drives with 460 Volts AC voltage ratings and 10 Horsepower output ratings.
Available Now
Request a quote for 74101-582-52

Description:

The Allen-Bradley 74101-582-52  PCB (Printed Circuit Board) or Gate Drive Board kit is made for the Allen-Bradley 1336 Plus and Force AC Drives. It is compatible with B-Frame 1336 Drives with 460 Volts AC voltage ratings and 10 Horsepower output ratings.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 74101-582-52.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 14 reviews

    Technical Specifications for 74101-582-52

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number74101-582-52
DescriptionPCB Gate Driver Board
Voltage460 Volts AC
Power Rating10.0 Horsepower
Current Raring48.0 Amps
FrameB
Units of Kits Per Drive1
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 74101-582-52 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 74101-582-52 units instead of migration.

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number74101-582-52
DescriptionPCB Gate Driver Board
Voltage460 Volts AC
Power Rating10.0 Horsepower
Current Raring48.0 Amps
FrameB
Units of Kits Per Drive1
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 74101-582-52 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 74101-582-52 units instead of migration.

s

About 74101-582-52

The 74101-582-52 PCB (Printed Circuit Board) is a gate drive board that is discontinued. It is a replacement gate driver board by Allen-Bradley that is designed for the 1336 Force and Plus AC drives. This board is backward –compatible, and it can be replaced with the 1336-CONV-SP2A Series A through C upgrade conversion kits. The 74101-582-52 PCB is designed for AC drives with 460 Volts AC and 10 Horsepower ratings. It is compatible with B Frame 48 Amps rated 1336 Force and Plus drives  The 74101-582-52 PCB is supplied as an assembly kit with installation accessories and a spare part board.



 



The 74101-582-52 Gate Drive Board is installed close to the main chassis and the control board. Every time the power module is replaced, the gate drive board must be tested. Testing is done by inspecting for open fuse conditions at fuses F1 and F3 on the board. The installation of the 74101-582-52 gate drive board is simple. To install the board, remove the drive’s frame and turn off the power. Check for the absence of control voltage and for zero voltage on the –DC and +DC terminals on terminal block TB1. Detach the main control board to gain access to the gate drive board. Remove the 6 jumper connectors on the old board and gently remove the board from the bracket. Attach the new board to the bracket and reconnect the 6 jumper connectors. Attach the main control board, and reconnect power to the drive. Check the 1336 PLUS-6.2 or 1336 FORCE-6.2 troubleshooting guides for more details on how to remove and install drive’s components.



Repair Services for 74101-582-52

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 74101-582-52. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 74101-582-52

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 74101-582-52

Resolutions For 74101-582-52

About

Technical Specifications for 74101-582-52

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number74101-582-52
DescriptionPCB Gate Driver Board
Voltage460 Volts AC
Power Rating10.0 Horsepower
Current Raring48.0 Amps
FrameB
Units of Kits Per Drive1
Product Lifecycle Status*Discontinued/Obsolete
BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part Number74101-582-52
DescriptionPCB Gate Driver Board
Voltage460 Volts AC
Power Rating10.0 Horsepower
Current Raring48.0 Amps
FrameB
Units of Kits Per Drive1
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 74101-582-52 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 74101-582-52 units instead of migration.

About 74101-582-52

The 74101-582-52 PCB (Printed Circuit Board) is a gate drive board that is discontinued. It is a replacement gate driver board by Allen-Bradley that is designed for the 1336 Force and Plus AC drives. This board is backward –compatible, and it can be replaced with the 1336-CONV-SP2A Series A through C upgrade conversion kits. The 74101-582-52 PCB is designed for AC drives with 460 Volts AC and 10 Horsepower ratings. It is compatible with B Frame 48 Amps rated 1336 Force and Plus drives  The 74101-582-52 PCB is supplied as an assembly kit with installation accessories and a spare part board.



 



The 74101-582-52 Gate Drive Board is installed close to the main chassis and the control board. Every time the power module is replaced, the gate drive board must be tested. Testing is done by inspecting for open fuse conditions at fuses F1 and F3 on the board. The installation of the 74101-582-52 gate drive board is simple. To install the board, remove the drive’s frame and turn off the power. Check for the absence of control voltage and for zero voltage on the –DC and +DC terminals on terminal block TB1. Detach the main control board to gain access to the gate drive board. Remove the 6 jumper connectors on the old board and gently remove the board from the bracket. Attach the new board to the bracket and reconnect the 6 jumper connectors. Attach the main control board, and reconnect power to the drive. Check the 1336 PLUS-6.2 or 1336 FORCE-6.2 troubleshooting guides for more details on how to remove and install drive’s components.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 74101-582-52. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 74101-582-52. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF