SP-140147 | Allen Bradley Drives 1336 PCB Boards

SP-140147

Rated 5 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

SP-140147

Description: The SP-140147 device is an Allen-Bradley manufactured precharge switch kit. It has a voltage rating of 460 Volts. It is made to be used with Allen-Bradley 1336 drives.
Available Now
Request a quote for SP-140147

Description:

The SP-140147 device is an Allen-Bradley manufactured precharge switch kit. It has a voltage rating of 460 Volts. It is made to be used with Allen-Bradley 1336 drives.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the SP-140147.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 5 reviews

    Technical Specifications for SP-140147

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part NumberSP-140147
DescriptionPrecharge Switch Kit
Voltage460 Volts AC
Power40-50 Horsepower
Temperature0-60 degrees Celsius
StandardCE
IP ratingNA
MountingDIN Rail
Compatible Devices1336 Series Drives
BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part NumberSP-140147
DescriptionPrecharge Switch Kit
Voltage460 Volts AC
Power40-50 Horsepower
Temperature0-60 degrees Celsius
StandardCE
IP ratingNA
MountingDIN Rail
Compatible Devices1336 Series Drives
s

About SP-140147

The SP-140147 kit is an Allen-Bradley-manufactured precharge switch kit. It comes with a voltage rating of 460 Volts. The normal power rating of the switch kit ranges between 40 and 50 Horsepower. It is used with the Allen-Bradley 1336 drives. Precharge in high-voltage systems is the initial mode that limits the inrush current during the power up process. Precharge switches are used to increase the lifespan of different electronic components and increase the reliability of different high-voltage systems. The SP-140147 kit is used to limit the inrush current without making changes to the operating current. It is also used as a safety measure to protect the input capacitors that can be damaged by the inrush current. The precharge switch kit can only be set up and used in a clean and dry environment with zero traces of EMC noise. It should not be exposed to sources of high heat. The environmental temperature should be set between 0 and 60 degrees Celsius.



 



The Allen-Bradley SP-140147 precharge switch kit is used in the Allen-Bradley 1336 series industrial drives. The 1336 drive series is an adjustable frequency drive series. These drives are used to control and regulate the torque of 3-phase induction motors. The 1336 drives support both single and 3-phase electrical circuits. The drive features industry standard motor control algorithms including Volts per Hertz control, sensorless vector control control, and Vector control with Force Technology. The SP-140147 precharge switch kit protects the input capacitors, the main fuse, the battery cells, and the other electronic components from high inrush currents. The precharge switch kit is CE approved and certified with different industrial and electrical standards.



Repair Services for SP-140147

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SP-140147. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For SP-140147

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For SP-140147

Resolutions For SP-140147

About

Technical Specifications for SP-140147

BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part NumberSP-140147
DescriptionPrecharge Switch Kit
Voltage460 Volts AC
Power40-50 Horsepower
Temperature0-60 degrees Celsius
StandardCE
IP ratingNA
MountingDIN Rail
Compatible Devices1336 Series Drives
BrandAllen-Bradley / Rockwell Automation
Series1336 PCB Boards
Part NumberSP-140147
DescriptionPrecharge Switch Kit
Voltage460 Volts AC
Power40-50 Horsepower
Temperature0-60 degrees Celsius
StandardCE
IP ratingNA
MountingDIN Rail
Compatible Devices1336 Series Drives

About SP-140147

The SP-140147 kit is an Allen-Bradley-manufactured precharge switch kit. It comes with a voltage rating of 460 Volts. The normal power rating of the switch kit ranges between 40 and 50 Horsepower. It is used with the Allen-Bradley 1336 drives. Precharge in high-voltage systems is the initial mode that limits the inrush current during the power up process. Precharge switches are used to increase the lifespan of different electronic components and increase the reliability of different high-voltage systems. The SP-140147 kit is used to limit the inrush current without making changes to the operating current. It is also used as a safety measure to protect the input capacitors that can be damaged by the inrush current. The precharge switch kit can only be set up and used in a clean and dry environment with zero traces of EMC noise. It should not be exposed to sources of high heat. The environmental temperature should be set between 0 and 60 degrees Celsius.



 



The Allen-Bradley SP-140147 precharge switch kit is used in the Allen-Bradley 1336 series industrial drives. The 1336 drive series is an adjustable frequency drive series. These drives are used to control and regulate the torque of 3-phase induction motors. The 1336 drives support both single and 3-phase electrical circuits. The drive features industry standard motor control algorithms including Volts per Hertz control, sensorless vector control control, and Vector control with Force Technology. The SP-140147 precharge switch kit protects the input capacitors, the main fuse, the battery cells, and the other electronic components from high inrush currents. The precharge switch kit is CE approved and certified with different industrial and electrical standards.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SP-140147. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SP-140147. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF