The 1336S-A010-AA-EN-HA1-L6 drive is a variable frequency drive that belongs to the 1336S PLUS product range that is designed by Allen-Bradley. The 1336S-A010-AA-EN-HA1-L6 drive is a microprocessor-controlled micro-drive that has an AC motor with an adjustable speed feature. The drive produces an adjustable frequency output and sine-coded pulse width modulation. The output frequency ranges from 0 to 400 Hertz. On the other hand, the nominal voltage range of this incredible machine is rated at 200 to 240 Volts AC. The drive performs at Horsepower ratings of 10 Horsepower or 7.5 kilowatts. It also provides proactive current limit capabilities for the rated output current from 20 to 160%. Supplementary features involve the enclosure kit that is provided with the apparatus, which has the IP ratings of NEMA 1 (IP 20). Plus, the 1336S-A010-AA-EN-HA1-L6 drive features a plug-in controller with a programmer human-machine interface module along with an analog pot.

The 1336S-A010-AA-EN-HA1-L6 drive has a 115 Volts AC interface as a control interface option and a B1/B2 frame size. The B frame drive has the function of the terminal blocks known as TB6 and TB4 that are situated on the base driver board. Using both terminals blocks, the power supply of the drive can be operated via an external source of voltage. Additionally, TB4 provides +5 Volts, ±15 Volts, and the isolated 12-Volt outputs for the boards, including the main control board/control interface boards/RIO board, the scan port/HMI, and the encoders. Furthermore, TB4 requires an input power supply of 22 to 28 Volts DC of power voltage, 2.25 Amps of average current, and 5 Amps of peak current. Whereas, TB6 requires 200 to 375 Volts DC of input voltage, 0.5 Amps of average current and 1 Amp of peak current. The acceptable wire size for TB4 is 2.1 square millimeters or 14 AWG maximum and 0.06 square millimeters or 30 AWG minimum. For TB6, on the other hand, the acceptable wire size range is 10 and 30 AWG (5.3 and 0.06 square millimeters). Most importantly, it can be used only with copper wires with a minimum temperature rating of 75 degrees Celsius. For both terminal blocks, the maximum torque is 0.57 N-m (5 pounds on an inch).