The 1336S-B007-AA-EN4-GM1-HA2 drive is a variable frequency drive designed by Allen-Bradley. The flying start feature is enabled in this drive. It helps the drive to convert smooth and instantaneous connections into rotating loads without using any speed feedback device. The drive runs with 480 Volts AC from a 3-phase electrical source. The total power output of the drive is 7.5 Horsepower with a normal load. This drive is available in the English language. The 1336S-B007-AA-EN4-GM1-HA2 drive has a single-point remote I/O B frame with a snap-in cradle. The front side of the drive has a blank plate with the company label on it. The drive makes use of the single-point remote I/O for all internal communications. The operator of the drive can integrate the drive into industrial manufacturing by using the communication port. The communication activity can be seen on the front panel of the drive. The operator of the 1336S-B007-AA-EN4-GM1-HA2 drive can manage information from different floors and integrate their complete system as they control and configure for data collection.

The 1336S-B007-AA-EN4-GM1-HA2 drive features integral EMC filtering and it is equipped with built-in DC cores and capacitors which makes it a 1-stop solution to meet the EMC requirements, including the CE standard in Europe. An IGBT braking system is used in the drive to control the speed of the motor. It has the ability to deliver a cost-effective means of switching regenerative energy. The 1336S-B007-AA-EN4-GM1-HA2 drive has the current limit capability feature which allows the proactive current limit to be programmable from 20 to 160% of the rated output current. It has an independently programmable proportional and integral gain. The drive has also received the agency certification from the UL and the CSA.