1336S-B010-AA-EN-HA2-L4 | Allen Bradley Drives 1336 PLUS Drives

1336S-B010-AA-EN-HA2-L4

Rated 4.4 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336S-B010-AA-EN-HA2-L4

Revisions: Ser A 
Description: The 1336S-B010-AA-EN-HA2-L4 manufactured by Allen-Bradley/Rockwell Automation is a 10 HP unit. This VFD is powered with 380-480V AC. This 1336 Plus AC drive has a rating of 7.5 kilowatt and has a programmer/controller with digital Pot inferface module. Additionally, this AC drive has a TTL contact option. This 1336 Plus drive has the English language installed.
Available Now
Request a quote for 1336S-B010-AA-EN-HA2-L4

Description: The 1336S-B010-AA-EN-HA2-L4 manufactured by Allen-Bradley/Rockwell Automation is a 10 HP unit. This VFD is powered with 380-480V AC. This 1336 Plus AC drive has a rating of 7.5 kilowatt and has a programmer/controller with digital Pot inferface module. Additionally, this AC drive has a TTL contact option. This 1336 Plus drive has the English language installed.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336S-B010-AA-EN-HA2-L4.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.4 with 6 reviews

    Technical Specifications for 1336S-B010-AA-EN-HA2-L4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-B010-AA-EN-HA2-L4
Product Line1336 PLUS
Voltage380-480V AC
HP Rating10
Enclosure TypeIP20 (NEMA 1)
LanguageEnglish
Human Interface ModuleProgrammer/Controller; Digital Pot
Control Interface OptionsTTL
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-B010-AA-EN-HA2-L4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-B010-AA-EN-HA2-L4 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-B010-AA-EN-HA2-L4
Product Line1336 PLUS
Voltage380-480V AC
HP Rating10
Enclosure TypeIP20 (NEMA 1)
LanguageEnglish
Human Interface ModuleProgrammer/Controller; Digital Pot
Control Interface OptionsTTL
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-B010-AA-EN-HA2-L4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-B010-AA-EN-HA2-L4 units instead of migration.

s

About 1336S-B010-AA-EN-HA2-L4

The 1336S-B010-AA-EN-HA2-L4 from Allen Bradley is a 380 to 480 Volt AC drive that produces a 10 Horsepower power rating. Housed in an IP20 NEMA 1 enclosure, this 1336 PLUS series drive has a large number of extra features. The 1336S-B010-AA-EN-HA2-L4 comes with powerful speed control capabilities, making it ideal for industrial settings. Each motor comes with a variable control feature that is powered by the 3-Phase Induction platform. This drive offers a Metal Oxide Varistor, which helps offer high protection against any surge. Additionally, the Metal Oxide Varistor offers a Phase-to-Phase type of protection. The 1336S-B010-AA-EN-HA2-L4 is ideal for connections that involve direct connection AC lines; it also features Control Interface Options that are designed to address various needs from the parts of users. Some of these options include contact closure plus various interface options, such as the +24 Volts AC/DC. With these options, users can control & operate the module via an HMI display platform/panel. The 1336S-B010-AA-EN-HA2-L4 is a high-performance drive that is designed with an exceptional slot-based architecture, enabling easy customization with existing option cards. This drive comes with multiple slots and a non-programmable input situated at terminal 30, which dedicated to the drive’s hardware enable. Before the device starts up, this input must be available. Remember, opening this input shuts off the drive output and ignoring the automated stop mode leads to a “coast to stop”. The Digital Input 0 (DI 0) on the drive is programmable and can be customized for digital input functions, such as the DI enable. Besides, the hardware enables available jumper on the main control unit to be detached to force DI, which functions as hardware.



If an unshielded cable routing is used, ensure that the control signal circuits don’t run parallel to the motor cables/unfiltered supply cables having a spacing of less than 1 foot (0.3 meters). It is equally important to use separate conduits or cable tray metal dividers. When an insulation rating of 600 Volts or below is used, the signal & control wiring should be routed inside the drive’s enclosure such that it’s isolated from any other wiring as well as uninsulated live parts. Remember, all optional accessories must be installed by a professional service personnel/provider. The 1336S-B010-AA-EN-HA2-L4 can be fitted with an RFI filter to help control radio-frequency emissions being conducted into the ground wiring or main supply lines. During installation, carefully follow all the recommended cabling precautions to avoid interference problems, especially when the drive is utilized with conventional electronic circuits & systems. If there’s a possibility of sensitive circuits or equipment being installed on a single AC supply, a filter might be required. Where it’s essential that extremely low emission levels should be achieved, an optional RFI filter should be incorporated. All 1336 PLUS Series drives are furnished with a Metal Oxide Varistor (MOV) and phase-to-phase, phase-to-ground, and voltage surge protection that is creatively designed to meet the standard requirements of IEEE 587. Note that the MOV circuit is intended for transient line protection only (surge suppression), not continuous operation. Exceeding the standard voltage ratings (line-to-line & line-to-ground) might cause physical damage to the device’s MOV.



Technical Description of 1336S-B010-AA-EN-HA2-L4

Allen-Bradley 1336 PLUS Drive with 380-480V AC voltage, 10 horsepower rating and IP20 (NEMA 1) enclosure

Repair Services for 1336S-B010-AA-EN-HA2-L4

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 1336S-B010-AA-EN-HA2-L4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions for 1336S-B010-AA-EN-HA2-L4

Please refer to the manual for more information about the 1336S-B010-AA-EN-HA2-L4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-B010-AA-EN-HA2-L4 Ser A
1336S-B010-AA-EN-HA2-L4/A, Series A, Rev A Request Quote
Common misspellings:
  • l336S-B010-AA-EN-HA2-L4
  • 1336S-8010-AA-EN-HA2-L4
  • 1336S-Bo10-AA-EN-HA2-L4
  • 1336S-B0l0-AA-EN-HA2-L4
  • 1336S-B01o-AA-EN-HA2-L4
  • 1336S-B010-AA-EN-HA2-14
  • 1336S-B010-AA-EN-HA2-LA
  • 1336SB010AAENHA2L4

Dimensions For 1336S-B010-AA-EN-HA2-L4

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336S-B010-AA-EN-HA2-L4

Resolutions For 1336S-B010-AA-EN-HA2-L4

About

Technical Specifications for 1336S-B010-AA-EN-HA2-L4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-B010-AA-EN-HA2-L4
Product Line1336 PLUS
Voltage380-480V AC
HP Rating10
Enclosure TypeIP20 (NEMA 1)
LanguageEnglish
Human Interface ModuleProgrammer/Controller; Digital Pot
Control Interface OptionsTTL
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-B010-AA-EN-HA2-L4
Product Line1336 PLUS
Voltage380-480V AC
HP Rating10
Enclosure TypeIP20 (NEMA 1)
LanguageEnglish
Human Interface ModuleProgrammer/Controller; Digital Pot
Control Interface OptionsTTL
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-B010-AA-EN-HA2-L4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-B010-AA-EN-HA2-L4 units instead of migration.

About 1336S-B010-AA-EN-HA2-L4

The 1336S-B010-AA-EN-HA2-L4 from Allen Bradley is a 380 to 480 Volt AC drive that produces a 10 Horsepower power rating. Housed in an IP20 NEMA 1 enclosure, this 1336 PLUS series drive has a large number of extra features. The 1336S-B010-AA-EN-HA2-L4 comes with powerful speed control capabilities, making it ideal for industrial settings. Each motor comes with a variable control feature that is powered by the 3-Phase Induction platform. This drive offers a Metal Oxide Varistor, which helps offer high protection against any surge. Additionally, the Metal Oxide Varistor offers a Phase-to-Phase type of protection. The 1336S-B010-AA-EN-HA2-L4 is ideal for connections that involve direct connection AC lines; it also features Control Interface Options that are designed to address various needs from the parts of users. Some of these options include contact closure plus various interface options, such as the +24 Volts AC/DC. With these options, users can control & operate the module via an HMI display platform/panel. The 1336S-B010-AA-EN-HA2-L4 is a high-performance drive that is designed with an exceptional slot-based architecture, enabling easy customization with existing option cards. This drive comes with multiple slots and a non-programmable input situated at terminal 30, which dedicated to the drive’s hardware enable. Before the device starts up, this input must be available. Remember, opening this input shuts off the drive output and ignoring the automated stop mode leads to a “coast to stop”. The Digital Input 0 (DI 0) on the drive is programmable and can be customized for digital input functions, such as the DI enable. Besides, the hardware enables available jumper on the main control unit to be detached to force DI, which functions as hardware.



If an unshielded cable routing is used, ensure that the control signal circuits don’t run parallel to the motor cables/unfiltered supply cables having a spacing of less than 1 foot (0.3 meters). It is equally important to use separate conduits or cable tray metal dividers. When an insulation rating of 600 Volts or below is used, the signal & control wiring should be routed inside the drive’s enclosure such that it’s isolated from any other wiring as well as uninsulated live parts. Remember, all optional accessories must be installed by a professional service personnel/provider. The 1336S-B010-AA-EN-HA2-L4 can be fitted with an RFI filter to help control radio-frequency emissions being conducted into the ground wiring or main supply lines. During installation, carefully follow all the recommended cabling precautions to avoid interference problems, especially when the drive is utilized with conventional electronic circuits & systems. If there’s a possibility of sensitive circuits or equipment being installed on a single AC supply, a filter might be required. Where it’s essential that extremely low emission levels should be achieved, an optional RFI filter should be incorporated. All 1336 PLUS Series drives are furnished with a Metal Oxide Varistor (MOV) and phase-to-phase, phase-to-ground, and voltage surge protection that is creatively designed to meet the standard requirements of IEEE 587. Note that the MOV circuit is intended for transient line protection only (surge suppression), not continuous operation. Exceeding the standard voltage ratings (line-to-line & line-to-ground) might cause physical damage to the device’s MOV.



Technical Description of 1336S-B010-AA-EN-HA2-L4

Allen-Bradley 1336 PLUS Drive with 380-480V AC voltage, 10 horsepower rating and IP20 (NEMA 1) enclosure
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 1336S-B010-AA-EN-HA2-L4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 1336S-B010-AA-EN-HA2-L4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Revisions

Please refer to the manual for more information about the 1336S-B010-AA-EN-HA2-L4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-B010-AA-EN-HA2-L4 Ser A
1336S-B010-AA-EN-HA2-L4/A, Series A, Rev A Request Quote

Common misspellings:
  • l336S-B010-AA-EN-HA2-L4
  • 1336S-8010-AA-EN-HA2-L4
  • 1336S-Bo10-AA-EN-HA2-L4
  • 1336S-B0l0-AA-EN-HA2-L4
  • 1336S-B01o-AA-EN-HA2-L4
  • 1336S-B010-AA-EN-HA2-14
  • 1336S-B010-AA-EN-HA2-LA
  • 1336SB010AAENHA2L4
PDF