The 1336S-B010-AA-EN5 drive is an Allen-Bradley adjustable frequency AC drive classified under the 1336 Plus series of drives. The 1336S-B010-AA-EN5 drive features the IP20 NEMA 1 enclosure. The 1336S-B010-AA-EN5 drive is easily configured and operated through the user-friendly human-machine interface. The HMI features a display screen and a full numeric keypad. The 1336S-B010-AA-EN5 drive can be installed in a user-supplied enclosure and mounted within the enclosure, or it can be mounted to allow the heatsink to extend outside the enclosure. The 1336S-B010-AA-EN5 drive comes with a power voltage rating of 380 to 480 Volts AC and it has a Horsepower rating of 10 Horsepower. The 1336 Plus series drive contains parts and assemblies that are sensitive to electrostatic discharge. static procedures must be followed when servicing, repairing, or installing the drive. If these procedures are not observed, there is a risk of component damage. In addition, authorized installers who are familiar with the equipment should install the 1336S-B010-AA-EN5 drive.

When the 1336S-B010-AA-EN5 drive starts up, the screen shows the drive status and in case there is a fault, the users can easily see it through the displayed message on the screen. The control panel is used for troubleshooting the drive. During the performance of the troubleshooting procedures, it is necessary for the users to be familiar with the manufacturer’s guidelines. The 1336S-B010-AA-EN5 drive has an RFI filtering feature that provides good immunity to the externally generated interference. The RFI filter controls the radio-frequency conducted emissions into the main supply lines and the ground wiring. The paths through which high-frequency ground current flows need to be defined and separated. This ensures that the sensitive circuits do not share a path with strong currents. In addition, the control and signal conductors should not be run next to or parallel to the power conductors.