The 1336S-B010-AN-EN4-HAP-L6 is an adjustable frequency AC drive that is manufactured by Allen-Bradley to implement speed control of AC induction motors with constant and variable torque capability.

This particular part number refers to an Allen-Bradley 1336 Plus drive that features a selectable Volts / Hertz or sensorless vector control. This drive belongs to drive’s with B2 frame reference. With this frame reference, the drive dimensions are 276.4 (10.88) x 476.3 (18.75) x 225.0 (8.86) (WxHxD).

This control method of the drive is selectable under the Control Select parameter. Vector control is the default active profile. Volts / Hertz must be manually activated under the same Control Select parameter then manually defined as custom Volts / Hertz.

Additionally, under parameter Process PI, the drive’s embedded Proportional + Integral (P+I) control algorithm may be configured to allow the drive to function as an automatic loop controller to maintain the process variable within an acceptable tolerance with reference to the setpoint.

This 1336 Plus drive does not come with an input power short circuit thus, an externally installed device for the said function must be installed. Furthermore, depending on the user required protection, additional protection devices may be installed such as filters, transformers, reactors and other components may be installed.

This drive is also pre-installed with a control interface option that is 115VAC interface. This control input option allows the drive to interface with signaling devices via contact closures. This control input has Nine (9) control inputs with each input may be assigned via programming.

The Allen-Bradley 1336S-B010-AN-EN4-HAP-L6 is a 1336 PLUS three-phase adjustable frequency AC drive with a voltage rating of 380 to 480V AC and nominal HP rating of 10 HP and 7.5 kW, as well as a controller interface option of 115V AC. The voltage tolerance of this drive depends on the minimum and maximum voltage of the drive, specifically -10% of the minimum voltage and +10% of the maximum voltage, and its frequency tolerance is 48 to 62 Hz. At a constant torque, the 1336S-B010-AN-EN4-HAP-L6 drive has an input kVA of 11 to 14 kVA, an output kVA of 13 kVA, input Amps of 17A, and output Amps of 16.1A. A variable torque of this drive results in an input kVA of 14 to 18 kVA, an output kVA of 17 kVA, input Amps of 22A, and output Amps of 21A. When in operation, the 1336S-B010-AN-EN4-HAP-L6 drive should be located at an altitude of 1000 m or less and it has an ambient temperature ranging from 0 to 50 deg. C. It should be stored at a temperature ranging from -40 to 70 deg. C. Trips will occur on the drive when it reaches specified thresholds for protection and these trips are dependent on the drive’s VT rated current. The AC input overvoltage trip is at 285V AC and the AC input undervoltage trip is at 138V AC.