The 1336S-B010-AN-EN6 drive is an Allen-Bradley adjustable frequency AC drive classified under the 1336 drive series. The 1336S-B010-AN-EN6 drive features a Metal Oxide Varistor (MOV) that provide effective protection from surges. The MOV also offers the phase-to-phase plus phase-to-ground protection and so it is designed to meet the IEEE 587 standards. The 1336S-B010-AN-EN6 drive features a display panel that shows fault codes when the drive detects a fault condition. The user-friendly human-machine interface can be used to ensure that the unit is always functioning optimally. When the 1336S-B010-AN-EN6 drive is powered up, the HMI will cycle through a series of displays. The status of the drive is also displayed after the device startup procedure is completed.  Before attempting to resolve any problems, it is necessary for the users to refer to the manufacturer’s guidelines as outlined in the user manual.

The 1336S-B010-AN-EN6 drive comes with the Sensorless vector control feature. This mode has been included to replace the Volts per Hertz control as the factory default control method. During the drive installation process, the use of the shielded cable is recommended if the sensitive circuits or the devices are connected or mounted to the machinery that is driven by the motor. This shield needs to be connected to both the drive ground and the motor frame ground. The 1336S-B010-AN-EN6 drive features electrostatic discharge-sensitive assemblies. Therefore, the installer should follow all of the static control guidelines. This is done when installing, testing, servicing, or repairing the device. Note that failure to follow the static control guidelines might result in component damage. In addition, only a qualified and experienced installer should replace or service the device to ensure optimal functionality.