The 1336S-B020-AN-EN is a drive that is manufactured by Allen-Bradley under the 1336 PLUS series. The 1336S-B020-AN-EN features 380 to 480 Volts AC as the voltage rating and it produces 20 Horsepower. This drive is housed in an IP00 Open Type Enclosure. As a member of the 1336 PLUS series, the 1336S-B020-AN-EN provides the users with speed control capabilities which are ideal for industrial operation. Each of the motors running the 1336S-B020-AN-EN has variable control through a three-phase induction feature. The 1336S-B020-AN-EN comes with a Metal Oxide Varistor (MOV). This feature offers protection against surges and also phase-to-phase group protection. The 1336S-B020-AN-EN is suitable for direct connection to an AC line as long as it has the right voltage.

The 1336S-B020-AN-EN comes with various tuning options, making it very simple to use. These tuning options enable fine tuning to maximize the torque performance offered by the 1336S-B020-AN-EN. The drive can be installed with an RFI filter. The RFI filter allows for controlling any radio frequency-conducted emissions. Therefore, so long as the cabling and installation recommendations are adhered to, then there is a very low likelihood that interference issues will occur. The 1336S-B020-AN-EN also comes with a Human Machine Interface (HMI) installed. The HMI is connected to it as an adapter and it is usually visible from the front side of the drive. This HMI comes in two sessions. These are the display panel and the control panel. Through the display panel, the programming of the drive is done and the users are able to view the parameters keyed. The HMI also comes with a keypad which makes it easy to configure the 1336S-B020-AN-EN. The keypad has various keys through which commands are keyed. Note that starting the 1336S-B020-AN-EN is very simple because it is designed to use the programmable parameters. Therefore, most of the startups can be accomplished by just adjusting the parameters.