The 1336S-B060-AN-EN4-HA1-L6 drive is a variable speed controller manufactured by Allen-Bradley/Rockwell Automation. Allen-Bradley recommends that the 1336S-B060-AN-EN4-HA1-L6 drive be installed, repaired, and serviced only by qualified technicians. The controller contains a control interface board with a terminal connection that is referred to as an auxiliary input. The input provides a way to connect auxiliary interlock, among other things. This is an external user-provided circuit that is capable of providing, reset circuitry among other interlocking circuitry options. The 1336S-B060-AN-EN4-HA1-L6 drive belongs to the Allen-Bradley 1336S Plus family of controllers with a variable speed. The Allen-Bradley 1336S-B060-AN-EN4-HA1-L6 drive, like other controllers in the same series, uses bits to represent characters or status points. One bit is a single character or status point that is used in programmable logic, and 8 bits from a byte while 16 bits form a word.

The Allen-Bradley 1336S-B060-AN-EN4-HA1-L6 drive, like others in the same series, makes use of connectors to connect 1 drive board to another. Note that the connectors can either be male or female. The difference between the 2 types of connectors is that male connectors contain pins and are stationary while female connectors are plugged into the male connectors and are found at the end of the wire ribbons. The Allen-Bradley 1336S-B060-AN-EN4-HA1-L6 drive has a minimum rated operating voltage of 380 Volts AC and a maximum rated input voltage of 480 Volts AC. The controller supports an open enclosure type and it allows for programming in English. The 1336S-B060-AN-EN4-HA1-L6 drive is CSA certified and is listed by the Underwriters Laboratories (UL).