1336S-B100-AA-EN4-HAP-L6 | Allen Bradley Drives 1336 PLUS Drives

1336S-B100-AA-EN4-HAP-L6

Rated 4.5 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336S-B100-AA-EN4-HAP-L6

Revisions: Ser A 
Description: This AB AC drive has a rating of 75 kW. This adjustable frequency drive has power requirements of 380-480 VAC. Additionally, it is a 100 HP drive. This AC drive has English on the drive, has a D frame size, and has a 115 VAC or VDC card installed. This sensorless vector drive is contained in an IP 20 (NEMA 1) enclosure.
Available Now
Request a quote for 1336S-B100-AA-EN4-HAP-L6

Description: This AB AC drive has a rating of 75 kW. This adjustable frequency drive has power requirements of 380-480 VAC. Additionally, it is a 100 HP drive. This AC drive has English on the drive, has a D frame size, and has a 115 VAC or VDC card installed. This sensorless vector drive is contained in an IP 20 (NEMA 1) enclosure.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336S-B100-AA-EN4-HAP-L6.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 17 reviews

    Technical Specifications for 1336S-B100-AA-EN4-HAP-L6

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-B100-AA-EN4-HAP-L6
Voltage380 to 480 Volts AC
kW (Horsepower)75 (100)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HAPSnap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-B100-AA-EN4-HAP-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-B100-AA-EN4-HAP-L6 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-B100-AA-EN4-HAP-L6
Voltage380 to 480 Volts AC
kW (Horsepower)75 (100)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HAPSnap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-B100-AA-EN4-HAP-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-B100-AA-EN4-HAP-L6 units instead of migration.

s

About 1336S-B100-AA-EN4-HAP-L6

The Allen Bradley/Rockwell Automation 1336S-B100-AA-EN4-HAP-L6 drive is a controller with user-adjustable frequency. It contains a control interface board that helps to connect external control devices to the 1336S-B100-AA-EN4-HAP-L6 drive. The control interface board is replaceable since Allen-Bradley controllers have a modular design. With this design, most of the parts can be replaced in the field. However, the replacement should be conducted by technicians with experience handling controllers with adjustable frequencies. When installing a new control interface board on the 1336S-B100-AA-EN4-HAP-L6 drive, the jumpers on the main control board must be removed and saved for later use and the necessary programming procedures must be performed. 



The 1336S-B100-AA-EN4-HAP-L6 drive’s control interface board should them be aligned over the 2 connectors on the main control board while checking the orientation. This step should be followed by pressing the board firmly on the main control board until it is fully lodged in place. The available screws should be used to hold the new control interface board firmly in place. The removed jumpers should be replaced and the programming should be done as required. The drive cover should then be replaced and the power should be reconnected. Due to the controller’s sensitivity to electrostatic discharge, proper grounding and other static control precautions should be observed when installing the main control board. Note that the Allen-Bradley 1336S-B100-AA-EN4-HAP-L6 drive supports 115 Volts AC voltage at its control interface. The controller features a human-machine interface module that only supports programming capabilities. The Horsepower rating for the 1336S-B100-AA-EN4-HAP-L6 drive is 100 Horsepower. The controller belongs to the Allen-Bradley/Rockwell Automation 1336S series of controllers with variable frequency.



Technical Description of 1336S-B100-AA-EN4-HAP-L6

This 1336 PLUS Adjustable Frequency AC drive is a 380-480V AC unit with 75 (100) kilowatts(horsepower) and has a(n) IP 20 (NEMA 1) enclosure. This unit is in the English language.

Repair Services for 1336S-B100-AA-EN4-HAP-L6

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-B100-AA-EN4-HAP-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336S-B100-AA-EN4-HAP-L6

Please refer to the manual for more information about the 1336S-B100-AA-EN4-HAP-L6 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-B100-AA-EN4-HAP-L6 Ser A
1336S-B100-AA-EN4-HAP-L6/A, Series A, Rev A Request Quote
Common misspellings:
  • l336S-B100-AA-EN4-HAP-L6
  • 1336S-8100-AA-EN4-HAP-L6
  • 1336S-Bl00-AA-EN4-HAP-L6
  • 1336S-B1o0-AA-EN4-HAP-L6
  • 1336S-B10o-AA-EN4-HAP-L6
  • 1336S-B100-AA-ENA-HAP-L6
  • 1336S-B100-AA-EN4-HAP-16
  • 1336SB100AAEN4HAPL6

Dimensions For 1336S-B100-AA-EN4-HAP-L6

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336S-B100-AA-EN4-HAP-L6

Resolutions For 1336S-B100-AA-EN4-HAP-L6

About

Technical Specifications for 1336S-B100-AA-EN4-HAP-L6

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-B100-AA-EN4-HAP-L6
Voltage380 to 480 Volts AC
kW (Horsepower)75 (100)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HAPSnap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-B100-AA-EN4-HAP-L6
Voltage380 to 480 Volts AC
kW (Horsepower)75 (100)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HAPSnap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-B100-AA-EN4-HAP-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-B100-AA-EN4-HAP-L6 units instead of migration.

About 1336S-B100-AA-EN4-HAP-L6

The Allen Bradley/Rockwell Automation 1336S-B100-AA-EN4-HAP-L6 drive is a controller with user-adjustable frequency. It contains a control interface board that helps to connect external control devices to the 1336S-B100-AA-EN4-HAP-L6 drive. The control interface board is replaceable since Allen-Bradley controllers have a modular design. With this design, most of the parts can be replaced in the field. However, the replacement should be conducted by technicians with experience handling controllers with adjustable frequencies. When installing a new control interface board on the 1336S-B100-AA-EN4-HAP-L6 drive, the jumpers on the main control board must be removed and saved for later use and the necessary programming procedures must be performed. 



The 1336S-B100-AA-EN4-HAP-L6 drive’s control interface board should them be aligned over the 2 connectors on the main control board while checking the orientation. This step should be followed by pressing the board firmly on the main control board until it is fully lodged in place. The available screws should be used to hold the new control interface board firmly in place. The removed jumpers should be replaced and the programming should be done as required. The drive cover should then be replaced and the power should be reconnected. Due to the controller’s sensitivity to electrostatic discharge, proper grounding and other static control precautions should be observed when installing the main control board. Note that the Allen-Bradley 1336S-B100-AA-EN4-HAP-L6 drive supports 115 Volts AC voltage at its control interface. The controller features a human-machine interface module that only supports programming capabilities. The Horsepower rating for the 1336S-B100-AA-EN4-HAP-L6 drive is 100 Horsepower. The controller belongs to the Allen-Bradley/Rockwell Automation 1336S series of controllers with variable frequency.



Technical Description of 1336S-B100-AA-EN4-HAP-L6

This 1336 PLUS Adjustable Frequency AC drive is a 380-480V AC unit with 75 (100) kilowatts(horsepower) and has a(n) IP 20 (NEMA 1) enclosure. This unit is in the English language.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-B100-AA-EN4-HAP-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-B100-AA-EN4-HAP-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336S-B100-AA-EN4-HAP-L6 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-B100-AA-EN4-HAP-L6 Ser A
1336S-B100-AA-EN4-HAP-L6/A, Series A, Rev A Request Quote

Common misspellings:
  • l336S-B100-AA-EN4-HAP-L6
  • 1336S-8100-AA-EN4-HAP-L6
  • 1336S-Bl00-AA-EN4-HAP-L6
  • 1336S-B1o0-AA-EN4-HAP-L6
  • 1336S-B10o-AA-EN4-HAP-L6
  • 1336S-B100-AA-ENA-HAP-L6
  • 1336S-B100-AA-EN4-HAP-16
  • 1336SB100AAEN4HAPL6
PDF