1336S-BRF100-AA-EN4-HA2 | Allen Bradley Drives 1336 PLUS Drives

1336S-BRF100-AA-EN4-HA2

Rated 4.9 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336S-BRF100-AA-EN4-HA2

Revisions: Ser A 
Description: This Allen-Bradley sensorless vector drive requires 380-480V AC or 513-620V DC power. This drive in addition has a horsepower rating of 1 HP. This sensorless vector drive is a 0.75 kW AC drive. This AC drive has a programmer/controller with digital Pot human interface module included.
Available Now
Request a quote for 1336S-BRF100-AA-EN4-HA2

Description: This Allen-Bradley sensorless vector drive requires 380-480V AC or 513-620V DC power. This drive in addition has a horsepower rating of 1 HP. This sensorless vector drive is a 0.75 kW AC drive. This AC drive has a programmer/controller with digital Pot human interface module included.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336S-BRF100-AA-EN4-HA2.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 7 reviews

    Technical Specifications for 1336S-BRF100-AA-EN4-HA2

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF100-AA-EN4-HA2
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)7.5 (10)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA2Snap-In Cradle/Blank Plate
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF100-AA-EN4-HA2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF100-AA-EN4-HA2 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF100-AA-EN4-HA2
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)7.5 (10)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA2Snap-In Cradle/Blank Plate
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF100-AA-EN4-HA2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF100-AA-EN4-HA2 units instead of migration.

s

About 1336S-BRF100-AA-EN4-HA2

The 1336S-BRF100-AA-EN4-HA2 drive is a 1336 Plus drive manufactured by Allen-Bradley. It is rated at 380 to 480 Volts AC or 513 to 620 Volts DC, at 48 to 62 Hertz. It runs on 3-phase power with  7.5 kilowatts and 10 Horsepower of output power. The constant torque ratings for the 1336S-BRF100-AA-EN4-HA2 drive are 12.2 to 14.7 input kVA, 13.9 output kVA, 18.5 input Amps, and 17.5 output Amps, and its variable torque ratings are 17.1 to 20.7 input kVA, 26 input Amps, 19.9 output kVA, and 25 output Amps. Its DC boost provides improved start-up acceleration and it has Volts per Hertz control with a simple voltage boost to ensure balanced load sharing in multi-motor applications with varied motor sizes.



Once powered up, the 1336S-BRF100-AA-EN4-HA2 Plus drive’s diagnostic features remain active throughout its run sequence to identify and report potential fault conditions in real-time. Its sensorless vector control provides excellent torque regulation across a wide speed range. This drive offers power loss ride-through to stay operational during short power interruptions. It provides 15 milliseconds of power ride-through at a full load, and its proactive current limit protects the drive against nuisance tripping during full acceleration or deceleration. The programmer/controller operator interface built into the front face of the 1336S-BRF100-AA-EN4-HA2 Plus drive features a digital potentiometer, a display panel, and function buttons.  It has an English V4.xx language module and a set of protective features including over-temperature protection, surge suppression, undervoltage protection, overvoltage protection, phase-to-phase protection, and drive overload protection. When installed with unshielded cables, this drive’s cables must be separated from sensitive devices to avoid interference.



Technical Description of 1336S-BRF100-AA-EN4-HA2

This 1336 PLUS Adjustable Frequency AC drive is a 380-480VAC or 513-620V DC unit with 7.5 (10) kilowatts(horsepower) and has a(n) IP 20 (NEMA 1) enclosure. This unit is in the English language.

Repair Services for 1336S-BRF100-AA-EN4-HA2

Type Lead Time Price Action
Repair Service 2-4 weeks $2244cartAdd to Cart

Our highly skilled technicians can repair your 1336S-BRF100-AA-EN4-HA2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336S-BRF100-AA-EN4-HA2

Please refer to the manual for more information about the 1336S-BRF100-AA-EN4-HA2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-BRF100-AA-EN4-HA2 Ser A
1336S-BRF100-AA-EN4-HA2/A, Series A, Rev A Request Quote
Common misspellings:
  • l336S-BRF100-AA-EN4-HA2
  • 1336S-8RF100-AA-EN4-HA2
  • 1336S-BRFl00-AA-EN4-HA2
  • 1336S-BRF1o0-AA-EN4-HA2
  • 1336S-BRF10o-AA-EN4-HA2
  • 1336S-BRF100-AA-ENA-HA2
  • 1336SBRF100AAEN4HA2

Dimensions For 1336S-BRF100-AA-EN4-HA2

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336S-BRF100-AA-EN4-HA2

Resolutions For 1336S-BRF100-AA-EN4-HA2

About

Technical Specifications for 1336S-BRF100-AA-EN4-HA2

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF100-AA-EN4-HA2
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)7.5 (10)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA2Snap-In Cradle/Blank Plate
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF100-AA-EN4-HA2
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)7.5 (10)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA2Snap-In Cradle/Blank Plate
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF100-AA-EN4-HA2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF100-AA-EN4-HA2 units instead of migration.

About 1336S-BRF100-AA-EN4-HA2

The 1336S-BRF100-AA-EN4-HA2 drive is a 1336 Plus drive manufactured by Allen-Bradley. It is rated at 380 to 480 Volts AC or 513 to 620 Volts DC, at 48 to 62 Hertz. It runs on 3-phase power with  7.5 kilowatts and 10 Horsepower of output power. The constant torque ratings for the 1336S-BRF100-AA-EN4-HA2 drive are 12.2 to 14.7 input kVA, 13.9 output kVA, 18.5 input Amps, and 17.5 output Amps, and its variable torque ratings are 17.1 to 20.7 input kVA, 26 input Amps, 19.9 output kVA, and 25 output Amps. Its DC boost provides improved start-up acceleration and it has Volts per Hertz control with a simple voltage boost to ensure balanced load sharing in multi-motor applications with varied motor sizes.



Once powered up, the 1336S-BRF100-AA-EN4-HA2 Plus drive’s diagnostic features remain active throughout its run sequence to identify and report potential fault conditions in real-time. Its sensorless vector control provides excellent torque regulation across a wide speed range. This drive offers power loss ride-through to stay operational during short power interruptions. It provides 15 milliseconds of power ride-through at a full load, and its proactive current limit protects the drive against nuisance tripping during full acceleration or deceleration. The programmer/controller operator interface built into the front face of the 1336S-BRF100-AA-EN4-HA2 Plus drive features a digital potentiometer, a display panel, and function buttons.  It has an English V4.xx language module and a set of protective features including over-temperature protection, surge suppression, undervoltage protection, overvoltage protection, phase-to-phase protection, and drive overload protection. When installed with unshielded cables, this drive’s cables must be separated from sensitive devices to avoid interference.



Technical Description of 1336S-BRF100-AA-EN4-HA2

This 1336 PLUS Adjustable Frequency AC drive is a 380-480VAC or 513-620V DC unit with 7.5 (10) kilowatts(horsepower) and has a(n) IP 20 (NEMA 1) enclosure. This unit is in the English language.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $2244cartAdd to Cart

Our highly skilled technicians can repair your 1336S-BRF100-AA-EN4-HA2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $2244cartAdd to Cart

Our highly skilled technicians can repair your 1336S-BRF100-AA-EN4-HA2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336S-BRF100-AA-EN4-HA2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-BRF100-AA-EN4-HA2 Ser A
1336S-BRF100-AA-EN4-HA2/A, Series A, Rev A Request Quote

Common misspellings:
  • l336S-BRF100-AA-EN4-HA2
  • 1336S-8RF100-AA-EN4-HA2
  • 1336S-BRFl00-AA-EN4-HA2
  • 1336S-BRF1o0-AA-EN4-HA2
  • 1336S-BRF10o-AA-EN4-HA2
  • 1336S-BRF100-AA-ENA-HA2
  • 1336SBRF100AAEN4HA2
PDF