The 1336S-BRF20-AA-EN5-HAP-L6 drive is a 1336S Plus series drive designed and manufactured by Allen-Bradley. The drive runs with a minimum voltage of 380 Volts AC and a maximum voltage of 480 Volts AC or a minimum voltage of 513 Volts DC and a maximum voltage of 620 Volts DC. The power output of the drive is rated at 2 Horsepower. The front part of the drive has an operator interface module which acts as a communication option between the drive and the operators of the drive. The 1336S-BRF20-AA-EN5-HAP-L6 drive is easy to start and run, configure, and troubleshoot. The drive can also be used in different regions because it can support multiple languages by using the language plugin. The conformally-coated body of the drive has an enclosure with a panel mounting base. The enclosure is rated with an IP 20 rating which indicates that the enclosure of the drive is not water-resistant. The drive uses non-volatile memory for storage and it has the ability to recover work after a power failure. The drive operates with a variable frequency which depends on the load.

The 1336S-BRF20-AA-EN5-HAP-L6 drive should be protected from electrostatic noise because it can diminish the performance of the drive. The operating temperature range of the drive lies between 0 and 50 degrees Celsius. When the drive is not going to be used for a longer period of time, it can be stored at an ambient room temperature in between -40 and +70 degrees Celsius. The 1336S-BRF20-AA-EN5-HAP-L6 drive has lowered internal inductance which decreases the snubber losses and this, in turn, enhances the performance of the IGBT braking system. A cooling fan is equipped inside the drive which kicks in when the power is turned on. This helps to maintain the temperature inside the drive.