1336S-BRF20-AN-EN5-HAP-L6 | Allen Bradley Drives 1336 PLUS Drives

1336S-BRF20-AN-EN5-HAP-L6

Rated 4.7 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336S-BRF20-AN-EN5-HAP-L6

Revisions: Ser A 
Description: This Allen-Bradley adjustable frequency drive is powered with 380-480 VAC. Additionally, this 1336 Plus AC drive comes with a kW rating of 1.5 kW. This adjustable frequency drive is a 2 horsepower drive, has the English language, and has an A2 frame size. This AC drive has a 115 VAC or VDC card. This VFD has an IP 00 (open type) enclosure.
Available Now
Request a quote for 1336S-BRF20-AN-EN5-HAP-L6

Description: This Allen-Bradley adjustable frequency drive is powered with 380-480 VAC. Additionally, this 1336 Plus AC drive comes with a kW rating of 1.5 kW. This adjustable frequency drive is a 2 horsepower drive, has the English language, and has an A2 frame size. This AC drive has a 115 VAC or VDC card. This VFD has an IP 00 (open type) enclosure.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336S-BRF20-AN-EN5-HAP-L6.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 11 reviews

    Technical Specifications for 1336S-BRF20-AN-EN5-HAP-L6

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF20-AN-EN5-HAP-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)1.5 (2)
Enclosure TypeIP 00 (Open)
LanguageEnglish
HAPSnap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF20-AN-EN5-HAP-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF20-AN-EN5-HAP-L6 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF20-AN-EN5-HAP-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)1.5 (2)
Enclosure TypeIP 00 (Open)
LanguageEnglish
HAPSnap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF20-AN-EN5-HAP-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF20-AN-EN5-HAP-L6 units instead of migration.

s

About 1336S-BRF20-AN-EN5-HAP-L6

The A2-frame Allen-Bradley 1336S-BRF20-AN-EN5-HAP-L6 drive is a 2 Horsepower AC drive. The Allen-Bradley product line to which it belongs is the 1336S Plus series. The 1336S-BRF20-AN-EN5-HAP-L6 drive comes with an integrated HMI (for programming only) and English language support. The 1336S-BRF20-AN-EN5-HAP-L6 drive is designed for highly accurate speed and torque control of AC motors. It is designed to operate with either AC or DC input. For DC input, the range of acceptable input voltages is from 513 to 620 Volts DC. For AC input, the range of nominal input voltages is from 380 to 480 Volts AC (nominal values), while the complete drive operating voltage range is from 342 to 528 Volts AC. Input protection is enabled on the 1336S-BRF20-AN-EN5-HAP-L6 drive to prevent damage which could result in abnormally high or low input voltages and the respective threshold values are 570 Volts AC and 280 Volts AC. Additionally, the drive bus is also protected from damage through the configured overvoltage and undervoltage bus voltages thresholds which are 810 and 400 Volts DC, respectively.



The output specifications for the 1336S-BRF20-AN-EN5-HAP-L6 drive are 2 Horsepower and 3.8 Amps for the constant torque and 4.0 Amps for the variable torque. An operating 1336S-BRF20-AN-EN5-HAP-L6 drive with a connected load dissipates 55 Watts of energy as heat. The open IP 00 rated enclosure of the 1336S-BRF20-AN-EN5-HAP-L6 drive is designed for vertical mounting. A minimum of 4 inches of spacing should be provided between 2 adjacent 1336S-BRF20-AN-EN5-HAP-L6 drives to prevent the drive from overheating. Sine-coded PWM and 115 Volts AC control interfaces are provided on each 1336S-BRF20-AN-EN5-HAP-L6 drive. The ambient temperature range which ensures reliable drive operation is from 0 to 50 degrees Celsius.



Technical Description of 1336S-BRF20-AN-EN5-HAP-L6

This 1336 PLUS Adjustable Frequency AC drive is a 380-480VAC or 513-620V DC unit with 1.5 (2) kilowatts(horsepower) and has a(n) IP 00 (Open) enclosure. This unit is in the English language.

Repair Services for 1336S-BRF20-AN-EN5-HAP-L6

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-BRF20-AN-EN5-HAP-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336S-BRF20-AN-EN5-HAP-L6

Please refer to the manual for more information about the 1336S-BRF20-AN-EN5-HAP-L6 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-BRF20-AN-EN5-HAP-L6 Ser A
1336S-BRF20-AN-EN5-HAP-L6/A, Series A, Rev A Request Quote
Common misspellings:
  • l336S-BRF20-AN-EN5-HAP-L6
  • 1336S-8RF20-AN-EN5-HAP-L6
  • 1336S-BRF2o-AN-EN5-HAP-L6
  • 1336S-BRF20-AN-EN5-HAP-16
  • 1336SBRF20ANEN5HAPL6

Dimensions For 1336S-BRF20-AN-EN5-HAP-L6

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336S-BRF20-AN-EN5-HAP-L6

Resolutions For 1336S-BRF20-AN-EN5-HAP-L6

About

Technical Specifications for 1336S-BRF20-AN-EN5-HAP-L6

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF20-AN-EN5-HAP-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)1.5 (2)
Enclosure TypeIP 00 (Open)
LanguageEnglish
HAPSnap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF20-AN-EN5-HAP-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)1.5 (2)
Enclosure TypeIP 00 (Open)
LanguageEnglish
HAPSnap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF20-AN-EN5-HAP-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF20-AN-EN5-HAP-L6 units instead of migration.

About 1336S-BRF20-AN-EN5-HAP-L6

The A2-frame Allen-Bradley 1336S-BRF20-AN-EN5-HAP-L6 drive is a 2 Horsepower AC drive. The Allen-Bradley product line to which it belongs is the 1336S Plus series. The 1336S-BRF20-AN-EN5-HAP-L6 drive comes with an integrated HMI (for programming only) and English language support. The 1336S-BRF20-AN-EN5-HAP-L6 drive is designed for highly accurate speed and torque control of AC motors. It is designed to operate with either AC or DC input. For DC input, the range of acceptable input voltages is from 513 to 620 Volts DC. For AC input, the range of nominal input voltages is from 380 to 480 Volts AC (nominal values), while the complete drive operating voltage range is from 342 to 528 Volts AC. Input protection is enabled on the 1336S-BRF20-AN-EN5-HAP-L6 drive to prevent damage which could result in abnormally high or low input voltages and the respective threshold values are 570 Volts AC and 280 Volts AC. Additionally, the drive bus is also protected from damage through the configured overvoltage and undervoltage bus voltages thresholds which are 810 and 400 Volts DC, respectively.



The output specifications for the 1336S-BRF20-AN-EN5-HAP-L6 drive are 2 Horsepower and 3.8 Amps for the constant torque and 4.0 Amps for the variable torque. An operating 1336S-BRF20-AN-EN5-HAP-L6 drive with a connected load dissipates 55 Watts of energy as heat. The open IP 00 rated enclosure of the 1336S-BRF20-AN-EN5-HAP-L6 drive is designed for vertical mounting. A minimum of 4 inches of spacing should be provided between 2 adjacent 1336S-BRF20-AN-EN5-HAP-L6 drives to prevent the drive from overheating. Sine-coded PWM and 115 Volts AC control interfaces are provided on each 1336S-BRF20-AN-EN5-HAP-L6 drive. The ambient temperature range which ensures reliable drive operation is from 0 to 50 degrees Celsius.



Technical Description of 1336S-BRF20-AN-EN5-HAP-L6

This 1336 PLUS Adjustable Frequency AC drive is a 380-480VAC or 513-620V DC unit with 1.5 (2) kilowatts(horsepower) and has a(n) IP 00 (Open) enclosure. This unit is in the English language.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-BRF20-AN-EN5-HAP-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-BRF20-AN-EN5-HAP-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336S-BRF20-AN-EN5-HAP-L6 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-BRF20-AN-EN5-HAP-L6 Ser A
1336S-BRF20-AN-EN5-HAP-L6/A, Series A, Rev A Request Quote

Common misspellings:
  • l336S-BRF20-AN-EN5-HAP-L6
  • 1336S-8RF20-AN-EN5-HAP-L6
  • 1336S-BRF2o-AN-EN5-HAP-L6
  • 1336S-BRF20-AN-EN5-HAP-16
  • 1336SBRF20ANEN5HAPL6
PDF