1336S-BRF30-AA-EN-HA1-L6 | Allen Bradley Drives 1336 PLUS Drives

1336S-BRF30-AA-EN-HA1-L6

Rated 4.9 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336S-BRF30-AA-EN-HA1-L6

Revisions: Ser A 
Description: This AB 2.2 kW AC drive comes with a horsepower rating of 3 horsepower. This sensorless vector drive in addition requires 380-480V AC or 513-620V DC power. This adjustable frequency drive comes with English on the drive. This VFD is a size A2 frame drive and is contained in an IP 20 enclosure. This 1336 Plus drive has a programmer/controller with analog Pot HIM module included.
Available Now
Request a quote for 1336S-BRF30-AA-EN-HA1-L6

Description: This AB 2.2 kW AC drive comes with a horsepower rating of 3 horsepower. This sensorless vector drive in addition requires 380-480V AC or 513-620V DC power. This adjustable frequency drive comes with English on the drive. This VFD is a size A2 frame drive and is contained in an IP 20 enclosure. This 1336 Plus drive has a programmer/controller with analog Pot HIM module included.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336S-BRF30-AA-EN-HA1-L6.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 14 reviews

    Technical Specifications for 1336S-BRF30-AA-EN-HA1-L6

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF30-AA-EN-HA1-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)2.2 (3)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA1Snap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF30-AA-EN-HA1-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF30-AA-EN-HA1-L6 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF30-AA-EN-HA1-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)2.2 (3)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA1Snap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF30-AA-EN-HA1-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF30-AA-EN-HA1-L6 units instead of migration.

s

About 1336S-BRF30-AA-EN-HA1-L6

The 1336S-BRF30-AA-EN-HA1-L6 drive is a Force technology-enabled AC drive manufactured by Allen-Bradley. The drive uses a control algorithm for regulating induction motor devices. Force technology is Allen-Bradley’s patented control technology which provides low-speed performance with or without using a feedback device. It provides industry-leading control and delivers the highest level of performance for any application requirements. The 1336S-BRF30-AA-EN-HA1-L6 drive features a fast-acting current limit and the bus voltage regulation which results in maximum acceleration and deceleration without any tripping effects. The drive supports high-speed analog inputs which can also improve the drive’s response to torque or speed commands. Both open-loop and closed-loop torque regulation are supported in this drive. With open loop regulation, the drive has +/-5% torque regulation and with the use of encoder feedback, the drive provides +/-2% encoder feedback and it also has the ability to hold a full load at zero speed.



The 1336S-BRF30-AA-EN-HA1-L6 drive uses 380 to 480 Volts AC or 513 to 620 Volts DC input voltage for operation. The power output of the drive with a regular load is 3 Horsepower. A NEMA Type 1 enclosure is available on the drive for panel mounting. The enclosure comes with an IP 20 rating. The drive uses a snap-in cradle as 1 of its communication options. The drive has multilingual selection and it supports up to 7 different preset speeds. The 1336S-BRF30-AA-EN-HA1-L6 drive has a laminar bus design which has helped to reduce the internal inductance. This has helped to reduce the snubber losses and improve the IGBT performance of the drive. The drive has control interface cards which provide a terminal for access to fixed drive functions including the start, stop, and enable drive function. The temperature range needed to operate the drive is between 0 and 40 degrees Celsius in an indoor location.



Technical Description of 1336S-BRF30-AA-EN-HA1-L6

This 1336 PLUS Adjustable Frequency AC drive is a 380-480VAC or 513-620V DC unit with 2.2 (3) kilowatts(horsepower) and has a(n) IP 20 (NEMA 1) enclosure. This unit is in the English language.

Repair Services for 1336S-BRF30-AA-EN-HA1-L6

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-BRF30-AA-EN-HA1-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336S-BRF30-AA-EN-HA1-L6

Please refer to the manual for more information about the 1336S-BRF30-AA-EN-HA1-L6 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-BRF30-AA-EN-HA1-L6 Ser A
1336S-BRF30-AA-EN-HA1-L6/A, Series A, Rev A Request Quote
Common misspellings:
  • l336S-BRF30-AA-EN-HA1-L6
  • 1336S-8RF30-AA-EN-HA1-L6
  • 1336S-BRF3o-AA-EN-HA1-L6
  • 1336S-BRF30-AA-EN-HAl-L6
  • 1336S-BRF30-AA-EN-HA1-16
  • 1336SBRF30AAENHA1L6

Dimensions For 1336S-BRF30-AA-EN-HA1-L6

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336S-BRF30-AA-EN-HA1-L6

Resolutions For 1336S-BRF30-AA-EN-HA1-L6

About

Technical Specifications for 1336S-BRF30-AA-EN-HA1-L6

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF30-AA-EN-HA1-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)2.2 (3)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA1Snap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF30-AA-EN-HA1-L6
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)2.2 (3)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA1Snap-In Cradle/Blank Plate
L6115 Volts AC
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF30-AA-EN-HA1-L6 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF30-AA-EN-HA1-L6 units instead of migration.

About 1336S-BRF30-AA-EN-HA1-L6

The 1336S-BRF30-AA-EN-HA1-L6 drive is a Force technology-enabled AC drive manufactured by Allen-Bradley. The drive uses a control algorithm for regulating induction motor devices. Force technology is Allen-Bradley’s patented control technology which provides low-speed performance with or without using a feedback device. It provides industry-leading control and delivers the highest level of performance for any application requirements. The 1336S-BRF30-AA-EN-HA1-L6 drive features a fast-acting current limit and the bus voltage regulation which results in maximum acceleration and deceleration without any tripping effects. The drive supports high-speed analog inputs which can also improve the drive’s response to torque or speed commands. Both open-loop and closed-loop torque regulation are supported in this drive. With open loop regulation, the drive has +/-5% torque regulation and with the use of encoder feedback, the drive provides +/-2% encoder feedback and it also has the ability to hold a full load at zero speed.



The 1336S-BRF30-AA-EN-HA1-L6 drive uses 380 to 480 Volts AC or 513 to 620 Volts DC input voltage for operation. The power output of the drive with a regular load is 3 Horsepower. A NEMA Type 1 enclosure is available on the drive for panel mounting. The enclosure comes with an IP 20 rating. The drive uses a snap-in cradle as 1 of its communication options. The drive has multilingual selection and it supports up to 7 different preset speeds. The 1336S-BRF30-AA-EN-HA1-L6 drive has a laminar bus design which has helped to reduce the internal inductance. This has helped to reduce the snubber losses and improve the IGBT performance of the drive. The drive has control interface cards which provide a terminal for access to fixed drive functions including the start, stop, and enable drive function. The temperature range needed to operate the drive is between 0 and 40 degrees Celsius in an indoor location.



Technical Description of 1336S-BRF30-AA-EN-HA1-L6

This 1336 PLUS Adjustable Frequency AC drive is a 380-480VAC or 513-620V DC unit with 2.2 (3) kilowatts(horsepower) and has a(n) IP 20 (NEMA 1) enclosure. This unit is in the English language.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-BRF30-AA-EN-HA1-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-BRF30-AA-EN-HA1-L6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336S-BRF30-AA-EN-HA1-L6 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-BRF30-AA-EN-HA1-L6 Ser A
1336S-BRF30-AA-EN-HA1-L6/A, Series A, Rev A Request Quote

Common misspellings:
  • l336S-BRF30-AA-EN-HA1-L6
  • 1336S-8RF30-AA-EN-HA1-L6
  • 1336S-BRF3o-AA-EN-HA1-L6
  • 1336S-BRF30-AA-EN-HAl-L6
  • 1336S-BRF30-AA-EN-HA1-16
  • 1336SBRF30AAENHA1L6
PDF