The 1336S-BRF30-AA-EN-HA2-L6 drive is a 1336S Plus series motor speed and torque controller that has been designed and produced by Allen-Bradley/Rockwell Automation and it is intended to operate in indoor environments and with induction motors that require a controller so these can operate with a variable speed/torque option. The Allen-Bradley 1336S-BRF30-AA-EN-HA2-L6 1336S Plus series motor speed and torque controller drive has the capacity to work with AC and DC voltage that go from 380 to 480 Volts AC and from 513 to 620 Volts DC. It is important to mention that the drive has a tolerance of +10 and -10% and it can reach an efficiency rating of up to 97%.

The Allen-Bradley 1336S-BRF30-AA-EN-HA2-L6 1336S Plus series motor speed and torque controller drive needs to be included in a ground system. This ground system can be a parallel system or a single point system. Other recommendations are to separate the signal and power cables, to shield them, and also to add filters to the connections. These recommendations are intended to avoid electrical noise which can damage the drive. When installing the Allen-Bradley 1336S-BRF30-AA-EN-HA2-L6 1336S Plus series motor speed and torque controller drive, it is recommended to do it in a static-free workplace and the technicians need to discharge themselves before handling the equipment and using static-free tables and gloves is also recommended. For a human-machine interface, the Allen-Bradley 1336S-BRF30-AA-EN-HA2-L6 drive uses a programmer and controller with a digital pot. The Allen-Bradley 1336S-BRF30-AA-EN-HA2-L6 1336S Plus series motor speed and torque controller comes programmed in English. This can be modified by adding new language modules from the Allen-Bradley 1336S series catalog.