1336S-BRF30-AA-EN4 - In Stock | Allen Bradley Drives 1336 PLUS Drives

1336S-BRF30-AA-EN4

Rated 4.9 with 2 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336S-BRF30-AA-EN4

Revisions: Ser A 
Description: This Rockwell Automation 380-480 VAC 1336 Plus AC drive has a horsepower rating of 3 HP. It is a 2.2 kilowatt unit and has an English unit included on the drive. This 1336 Plus AC drive additionally is contained in an IP 20 enclosure. This sensorless vector drive is a size A2 frame unit.
In Stock Ships Today
Request a quote for 1336S-BRF30-AA-EN4

Description: This Rockwell Automation 380-480 VAC 1336 Plus AC drive has a horsepower rating of 3 HP. It is a 2.2 kilowatt unit and has an English unit included on the drive. This 1336 Plus AC drive additionally is contained in an IP 20 enclosure. This sensorless vector drive is a size A2 frame unit.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336S-BRF30-AA-EN4.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 2 reviews

    Technical Specifications for 1336S-BRF30-AA-EN4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF30-AA-EN4
Product Line1336 PLUS
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
Horsepower Rating3
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF30-AA-EN4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF30-AA-EN4 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF30-AA-EN4
Product Line1336 PLUS
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
Horsepower Rating3
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF30-AA-EN4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF30-AA-EN4 units instead of migration.

s

About 1336S-BRF30-AA-EN4

The Allen-Bradley/Rockwell Automation 1336S-BRF30-AA-EN4 drive is a variable speed drive. When installing the drive, care should be taken since some printed circuit boards and drive components may contain hazardous voltage levels. Therefore, the input power should be locked out when installing, maintaining, or repairing the drive. The 1336S-BRF30-AA-EN4 drive also contains parts that can easily be damaged by static electricity. This means that static electricity should be controlled before opening up the drive to avoid component damage. The 1336S-BRF30-AA-EN4 drive, like other variable speed drives from Allen-Bradley, must be grounded and the ground impedance must conform to the local industrial safety regulations. Additionally, the ground impedance should be tested and inspected at regular intervals.



All aspects of the 1336S-BRF30-AA-EN4 drive should be grounded at the required point. For example, the controller motor’s ground conductor must be connected directly to the drive’s ground terminal since connecting it to the enclosure busbar is likely to create an express route for high-frequency current returning from the motor frame and ground conductor. Also, when an encoder is used, the encoder cables must be routed inside of a steel conduit with the conduit grounded on both ends. If the cables are shielded, the shield should be grounded at the drive’s end only. Additionally, the control and signal wiring must be grounded at a single point in the system but not on the drive. The 1336S-BRF30-AA-EN4 drive has a Version 4 English language board, an IP 20 rated enclosure, and an input voltage of 480 Volts AC. The drive belongs to the Allen-Bradley 1336 PLUS series of drives.



Technical Description of 1336S-BRF30-AA-EN4

Allen-Bradley 1336 PLUS Drive with 380-480V AC or 513-620V DC voltage, 3 horsepower rating and IP20 (NEMA 1) enclosure

Repair Services for 1336S-BRF30-AA-EN4

Type Lead Time Price Action
Repair Service 2-4 weeks $1899cartAdd to Cart
Our highly skilled technicians can repair your 1336S-BRF30-AA-EN4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions for 1336S-BRF30-AA-EN4

Please refer to the manual for more information about the 1336S-BRF30-AA-EN4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-BRF30-AA-EN4 Ser A
1336S-BRF30-AA-EN4/A, Series A, Rev A Request Quote
Common misspellings:
  • l336S-BRF30-AA-EN4
  • 1336S-8RF30-AA-EN4
  • 1336S-BRF3o-AA-EN4
  • 1336S-BRF30-AA-ENA
  • 1336SBRF30AAEN4

Dimensions For 1336S-BRF30-AA-EN4

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336S-BRF30-AA-EN4

Resolutions For 1336S-BRF30-AA-EN4

About

Technical Specifications for 1336S-BRF30-AA-EN4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF30-AA-EN4
Product Line1336 PLUS
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
Horsepower Rating3
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF30-AA-EN4
Product Line1336 PLUS
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
Horsepower Rating3
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF30-AA-EN4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF30-AA-EN4 units instead of migration.

About 1336S-BRF30-AA-EN4

The Allen-Bradley/Rockwell Automation 1336S-BRF30-AA-EN4 drive is a variable speed drive. When installing the drive, care should be taken since some printed circuit boards and drive components may contain hazardous voltage levels. Therefore, the input power should be locked out when installing, maintaining, or repairing the drive. The 1336S-BRF30-AA-EN4 drive also contains parts that can easily be damaged by static electricity. This means that static electricity should be controlled before opening up the drive to avoid component damage. The 1336S-BRF30-AA-EN4 drive, like other variable speed drives from Allen-Bradley, must be grounded and the ground impedance must conform to the local industrial safety regulations. Additionally, the ground impedance should be tested and inspected at regular intervals.



All aspects of the 1336S-BRF30-AA-EN4 drive should be grounded at the required point. For example, the controller motor’s ground conductor must be connected directly to the drive’s ground terminal since connecting it to the enclosure busbar is likely to create an express route for high-frequency current returning from the motor frame and ground conductor. Also, when an encoder is used, the encoder cables must be routed inside of a steel conduit with the conduit grounded on both ends. If the cables are shielded, the shield should be grounded at the drive’s end only. Additionally, the control and signal wiring must be grounded at a single point in the system but not on the drive. The 1336S-BRF30-AA-EN4 drive has a Version 4 English language board, an IP 20 rated enclosure, and an input voltage of 480 Volts AC. The drive belongs to the Allen-Bradley 1336 PLUS series of drives.



Technical Description of 1336S-BRF30-AA-EN4

Allen-Bradley 1336 PLUS Drive with 380-480V AC or 513-620V DC voltage, 3 horsepower rating and IP20 (NEMA 1) enclosure

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $1899cartAdd to Cart
Our highly skilled technicians can repair your 1336S-BRF30-AA-EN4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks $1899cartAdd to Cart
Our highly skilled technicians can repair your 1336S-BRF30-AA-EN4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Revisions

Please refer to the manual for more information about the 1336S-BRF30-AA-EN4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-BRF30-AA-EN4 Ser A
1336S-BRF30-AA-EN4/A, Series A, Rev A Request Quote

Common misspellings:
  • l336S-BRF30-AA-EN4
  • 1336S-8RF30-AA-EN4
  • 1336S-BRF3o-AA-EN4
  • 1336S-BRF30-AA-ENA
  • 1336SBRF30AAEN4
PDF