1336S-BRF50-AA-EN-HA2-L4 | Allen Bradley Drives 1336 PLUS Drives

1336S-BRF50-AA-EN-HA2-L4

Rated 4.7 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336S-BRF50-AA-EN-HA2-L4

Revisions: Ser A 
Description: This Rockwell Automation drive has a rating of 5 HP. Additionally, this AC drive is a 380-480V AC or 513-620V DC adjustable frequency drive. This 1336 Plus AC drive is a 3.7 kW drive, comes with an IP 20 (NEMA 1) enclosure, and comes with the English language installed. This sensorless vector drive has a programmer/controller with digital Pot inferface module included. This sensorless vector drive has a TTL contact board included.
Available Now
Request a quote for 1336S-BRF50-AA-EN-HA2-L4

Description: This Rockwell Automation drive has a rating of 5 HP. Additionally, this AC drive is a 380-480V AC or 513-620V DC adjustable frequency drive. This 1336 Plus AC drive is a 3.7 kW drive, comes with an IP 20 (NEMA 1) enclosure, and comes with the English language installed. This sensorless vector drive has a programmer/controller with digital Pot inferface module included. This sensorless vector drive has a TTL contact board included.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336S-BRF50-AA-EN-HA2-L4.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 12 reviews

    Technical Specifications for 1336S-BRF50-AA-EN-HA2-L4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF50-AA-EN-HA2-L4
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)3.7 (5)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA2Snap-In Cradle/Blank Plate
L4TTL Contact
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF50-AA-EN-HA2-L4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF50-AA-EN-HA2-L4 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF50-AA-EN-HA2-L4
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)3.7 (5)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA2Snap-In Cradle/Blank Plate
L4TTL Contact
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF50-AA-EN-HA2-L4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF50-AA-EN-HA2-L4 units instead of migration.

s

About 1336S-BRF50-AA-EN-HA2-L4

The 1336S-BRF50-AA-EN-HA2-L4 drive is an interface programmer-enabled AC drive manufactured by Allen-Bradley. This AC drive is equipped with a digital potentiometer. It is a Series D drive and it belongs to the 1336S Plus drive series by Allen-Bradley. Both English AND Spanish are used for programming the drive. The input voltage rating of the drive is 380 to 480 Volts AC and uses a 3-phase electric source to consume power. The operating frequency of the 1336S-BRF50-AA-EN-HA2-L4 drive ranges from 50 to 60 Hertz depending on the load conditions of the drive. Under normal duty, the drive can generate 5 Horsepower of output power. The body of the drive has a conformal coating and it can be mounted by using a NEMA Type 1 enclosure which comes with an IP 20 rating. The control interface board of the drive uses the Allen-Bradley 1336-L4 TTL and 1201-HA2 interface module. The drive needs a room temperature between 0 and 40 degrees Celsius for regular use. The installation of the drive should take place in an area free from dirt, dust, and volatile gases. The installation area should also be free from electromagnetic noise.



The 1336S-BRF50-AA-EN-HA2-L4 drive is equipped with a microprocessor-controlled heatsink thermistor. The thermistor trips the drive if it detects overheating inside the drive. It saves the drive from damages due to overheating. The drive is protected with Class 10 motor overload protection and ground fault protection. Ground fault protection checks for the reliability of the drive when the drive is running and during the starting phase. The 1336S-BRF50-AA-EN-HA2-L4 drive is also equipped with a fan for cooling down the drive. The drive uses an IGBT braking system for effective stopping under normal operation. It provides a programmable DC hold level and DC hold time to develop torque in the motor after a ramp to stop.



Technical Description of 1336S-BRF50-AA-EN-HA2-L4

This 1336 PLUS Adjustable Frequency AC drive is a 380-480VAC or 513-620V DC unit with 3.7 (5) kilowatts(horsepower) and has a(n) IP 20 (NEMA 1) enclosure. This unit is in the English language.

Repair Services for 1336S-BRF50-AA-EN-HA2-L4

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-BRF50-AA-EN-HA2-L4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1336S-BRF50-AA-EN-HA2-L4

Please refer to the manual for more information about the 1336S-BRF50-AA-EN-HA2-L4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-BRF50-AA-EN-HA2-L4 Ser A
1336S-BRF50-AA-EN-HA2-L4/A, Series A, Rev A Request Quote
Common misspellings:
  • l336S-BRF50-AA-EN-HA2-L4
  • 1336S-8RF50-AA-EN-HA2-L4
  • 1336S-BRF5o-AA-EN-HA2-L4
  • 1336S-BRF50-AA-EN-HA2-14
  • 1336S-BRF50-AA-EN-HA2-LA
  • 1336SBRF50AAENHA2L4

Dimensions For 1336S-BRF50-AA-EN-HA2-L4

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336S-BRF50-AA-EN-HA2-L4

Resolutions For 1336S-BRF50-AA-EN-HA2-L4

About

Technical Specifications for 1336S-BRF50-AA-EN-HA2-L4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF50-AA-EN-HA2-L4
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)3.7 (5)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA2Snap-In Cradle/Blank Plate
L4TTL Contact
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-BRF50-AA-EN-HA2-L4
Voltage380 to 480 Volts AC or 513 to 620 Volts DC
kW (Horsepower)3.7 (5)
Enclosure TypeIP 20 (NEMA 1)
LanguageEnglish
HA2Snap-In Cradle/Blank Plate
L4TTL Contact
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-BRF50-AA-EN-HA2-L4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-BRF50-AA-EN-HA2-L4 units instead of migration.

About 1336S-BRF50-AA-EN-HA2-L4

The 1336S-BRF50-AA-EN-HA2-L4 drive is an interface programmer-enabled AC drive manufactured by Allen-Bradley. This AC drive is equipped with a digital potentiometer. It is a Series D drive and it belongs to the 1336S Plus drive series by Allen-Bradley. Both English AND Spanish are used for programming the drive. The input voltage rating of the drive is 380 to 480 Volts AC and uses a 3-phase electric source to consume power. The operating frequency of the 1336S-BRF50-AA-EN-HA2-L4 drive ranges from 50 to 60 Hertz depending on the load conditions of the drive. Under normal duty, the drive can generate 5 Horsepower of output power. The body of the drive has a conformal coating and it can be mounted by using a NEMA Type 1 enclosure which comes with an IP 20 rating. The control interface board of the drive uses the Allen-Bradley 1336-L4 TTL and 1201-HA2 interface module. The drive needs a room temperature between 0 and 40 degrees Celsius for regular use. The installation of the drive should take place in an area free from dirt, dust, and volatile gases. The installation area should also be free from electromagnetic noise.



The 1336S-BRF50-AA-EN-HA2-L4 drive is equipped with a microprocessor-controlled heatsink thermistor. The thermistor trips the drive if it detects overheating inside the drive. It saves the drive from damages due to overheating. The drive is protected with Class 10 motor overload protection and ground fault protection. Ground fault protection checks for the reliability of the drive when the drive is running and during the starting phase. The 1336S-BRF50-AA-EN-HA2-L4 drive is also equipped with a fan for cooling down the drive. The drive uses an IGBT braking system for effective stopping under normal operation. It provides a programmable DC hold level and DC hold time to develop torque in the motor after a ramp to stop.



Technical Description of 1336S-BRF50-AA-EN-HA2-L4

This 1336 PLUS Adjustable Frequency AC drive is a 380-480VAC or 513-620V DC unit with 3.7 (5) kilowatts(horsepower) and has a(n) IP 20 (NEMA 1) enclosure. This unit is in the English language.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-BRF50-AA-EN-HA2-L4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336S-BRF50-AA-EN-HA2-L4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1336S-BRF50-AA-EN-HA2-L4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-BRF50-AA-EN-HA2-L4 Ser A
1336S-BRF50-AA-EN-HA2-L4/A, Series A, Rev A Request Quote

Common misspellings:
  • l336S-BRF50-AA-EN-HA2-L4
  • 1336S-8RF50-AA-EN-HA2-L4
  • 1336S-BRF5o-AA-EN-HA2-L4
  • 1336S-BRF50-AA-EN-HA2-14
  • 1336S-BRF50-AA-EN-HA2-LA
  • 1336SBRF50AAENHA2L4
PDF