The 1336S-BRF75-AN-EN-HASB-L6 drive is an adjustable frequency AC drive from Allen-Bradley. This drive operates within a voltage range from 380 to 480 Volts AC. The Horsepower rating for this drive is 7.5 Horsepower which is the total power output when the drive is running in normal conditions. The enclosure is open on this drive. The panel-mounted enclosure that is used in this drive has an IP 00 protection rating. No human-machine interface module is present in this drive. The front panel of the drive has a blank plate with the company label instead of an interface. The 1336S-BRF75-AN-EN-HASB-L6 drive uses a 115 Volts AC control interface. This interface is used to communicate with external manufacturing plants. The drive is also equipped with a feedback encoder. The feedback encoder device monitors the operation of the drive. The operators of the drive can make decisions based on the encoder device’s feedback.

The 1336S-BRF75-AN-EN-HASB-L6 drive runs with a PWM input signal. The device comes with advanced hold features. It includes the DC hold time and DC hold level. The DC hold time sets the amount of time for which the voltage will be applied to the motor when the stop mode is set to the DC brake or ramp to stop mode. The DC hold level sets the DC voltage applied to the motor to produce the selected current during braking. The 1336S-BRF75-AN-EN-HASB-L6 drive also features the Bus limit function. This function attempts to limit the drive DC bus voltage to 110% of the nominal voltage value during rapid deceleration. The drive is equipped with multiple sensors to alert the operators for different system events. The proactive current control in the drive reduces the trip in the drive. The drive is fully compatible with other Allen-Bradley products through its serial communication port.