The 1336S-BX040-AN-EN5 drive from Allen-Bradley is a 30 kilowatts rated AC drive. The 1336S-BX040-AN-EN5 AC drive is part of the Allen-Bradley 1336S Plus series of drives which support both sensorless vector motor control and variable output frequencies. The language support provided by the onboard language module enables the drive to be programmed in English. This 1336S Plus series AC drive is certified for compliance with the following low voltage directives: the EN 60204-1 and the PREN 50178. These drives are also certified to comply with the following EMC standards: the EN 50081-1 and the EN 50082-1.

The 1336S-BX040-AN-EN5 drive is a drive with special ratings. The input and output ratings for current and power are the same for the constant and variable torque modes. The respective ratings are as follows: 40 to 50 kVA of input power, 61 Amps of input current, 40 Horsepower (30 kilowatts) of output power, and 59 Amps of output current. The drive ratings are based on 3-phase input voltages ranging from 380 to 480 Volts AC and input frequencies ranging from 48 to 62 Hertz. The 1336S-BX040-AN-EN5 drive comes in a frame-C enclosure which is open and is rated at IP 00. The maximum altitude at which the drive can be installed without output derating is 3300 feet above sea level. The ambient operating temperature range recommended by the manufacturer is from 32 to 122 degrees Fahrenheit. The shock rating for the drive is 15 G peak for 11 milliseconds duration (with a variation of  ±1.0 milliseconds). To minimize the risk of injury and equipment damage, the 1336S-BX040-AN-EN5 drive should be installed and serviced only by trained technicians who possess the relevant knowledge and experience.