The Allen-Bradley 1336S-C010-AN-FR5 drive can control the speed and torque of 3-phase induction motors. This drive is a 500 to 600 Volts AC drive from Allen-Bradley, The total power output of the drive is 10 Horsepower. The drive sports a panel mounting enclosure with an IP 00 protection rating. This open enclosure and the drive inside it should be protected against water sprays because it is not waterproof. The drive is for indoor use only. The 1336S-C010-AN-FR5 drive is equipped with a human-machine interface module on the front. For communication, a serial communication port is used. The drive belongs to the Allen-Bradley 1336S Plus series. It comes with sensorless vector control for enhanced torque regulation.

The 1336S-C010-AN-FR5 drive comes with many advanced features like the DC Boost select feature, which is a parameter that sets the level of DC boost that can be applied at lower frequencies. Auto settings automatically measure the motor resistance and adjust the boost voltage to maintain constant boost performance regardless of the changing of motor temperature. The drive is equipped with a heatsink thermistor which is controlled by a microprocessor. It saves the drive from overheating damages. The 1336S-C010-AN-FR5 drive should be installed in a well-ventilated place. No obstruction should be present between the nearest ventilation source and the heatsink of the drive. The air temperature of the inlet of the heatsink should match the specified temperature rating. EMC noise should not be present around the drive even in trace amounts. The heatsink temperature should not exceed the predefined value of 90 degrees Celsius. The ambient operating temperature also should not exceed 40 degrees Celsius.