Designed and engineered by Allen-Bradley, the 1336S-C050-AN-EN4-GM1-HA2 drive is a 1336S Plus drive that features the IP 00 open enclosure. The 1336S-C050-AN-EN4-GM1-HA2 drive comes with a power rating of 500 to 600 Volts AC. This English version drive comes with a snap-in cradle that is attached on the front side of the drive. Featuring the PI control, the Allen-Bradley 1336S-C050-AN-EN4-GM1-HA2 1336S Plus drive is able to monitor the feedback device and it can adjust the drive’s output according to the feedback requirements. 

The 1336S-C050-AN-EN4-GM1-HA2 drive features the slip compensation for developing torque in an induction motor. This means that the rotor speed slips relative to the stator speed, ensuring that the amount of slip is proportionate to the motor load. Thus, when the slip is increased, this provides the drive with the necessary torque. The slip compensation is instrumental for the applications that do not operate optimally at a decreased speed. The slip compensation feature is based on the programmed motor flux instead of the drive’s rated amperage. In addition, the slip compensation is active for both the steady-state and acceleration or the deceleration conditions. The 1336S-C050-AN-EN4-GM1-HA2 drive features the flying start, a feature that gives the drive the ability to determine the speed and the direction of the rotating motor. Thus, through the flying start feature, the 1336S-C050-AN-EN4-GM1-HA2 drive is able to begin its output at the respective application speed and in the respective direction. The 1336S-C050-AN-EN4-GM1-HA2 drive also features the line loss restart for controlling the timing and the method that is used for reconnecting the motor when the power is reconnected.