1336S-MCB-SP2A | Allen Bradley Drives 1336 PLUS Drives

1336S-MCB-SP2A

Rated 4.6 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336S-MCB-SP2A

Revisions: Ser A 
Description: The Allen-Bradley 1336S-MCB-SP2A is a Main Circuit Board for 1336 PLUS Adjustable Frequency AC Drives. It is designed to be used with “A” frame sized adjustable frequency AC drives 0.37 to 7.5 kW (0.5 to 10 HP). The 1336S-MCB-SP2A main circuit board is located in the lower part of the 1336 PLUS AC drive; it carries 18 connecting pins that are used as terminal TB2 for control and input signals exchange. The 1336S-MCB-SP2A terminals are used for potentiometer (pins 1,2, and 3: external speed reference, 10 k Ohm potentiometer required), analog input (pins 4, 5, and 6: 0 to 10 Volts DC or 4 to 20 mA), pulse Input for frequency reference (pins 7 and 8: externally powered square-wave pulse - 5V TTL logic), analog output (pin 9: Jumper JP1 to select 0 to 10V DC output, jumper JP2 to select 0 to 20mA output), CR1 to CR4 programmable relay contacts (pins 10 to 18: Fault, alarm, run signals or programmable). read more...
Available Now
Request a quote for 1336S-MCB-SP2A

Description: The Allen-Bradley 1336S-MCB-SP2A is a Main Circuit Board for 1336 PLUS Adjustable Frequency AC Drives. It is designed to be used with “A” frame sized adjustable frequency AC drives 0.37 to 7.5 kW (0.5 to 10 HP). The 1336S-MCB-SP2A main circuit board is located in the lower part of the 1336 PLUS AC drive; it carries 18 connecting pins that are used as terminal TB2 for control and input signals exchange. The 1336S-MCB-SP2A terminals are used for potentiometer (pins 1,2, and 3: external speed reference, 10 k Ohm potentiometer required), analog input (pins 4, 5, and 6: 0 to 10 Volts DC or 4 to 20 mA), pulse Input for frequency reference (pins 7 and 8: externally powered square-wave pulse - 5V TTL logic), analog output (pin 9: Jumper JP1 to select 0 to 10V DC output, jumper JP2 to select 0 to 20mA output), CR1 to CR4 programmable relay contacts (pins 10 to 18: Fault, alarm, run signals or programmable). read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336S-MCB-SP2A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 8 reviews

    Technical Specifications for 1336S-MCB-SP2A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-MCB-SP2A
Product Line1336 PLUS
Part TypeCircuit Board
Control FunctionMain Control
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-MCB-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-MCB-SP2A units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-MCB-SP2A
Product Line1336 PLUS
Part TypeCircuit Board
Control FunctionMain Control
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-MCB-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-MCB-SP2A units instead of migration.

s

About 1336S-MCB-SP2A

The Allen-Bradley 1336S-MCB-SP2A is a Main Circuit Board for 1336 PLUS Adjustable Frequency AC Drives. It is designed to be used with “A” frame sized adjustable frequency AC drives 0.37 to 7.5 kW (0.5 to 10 HP). The 1336S-MCB-SP2A main circuit board is located in the lower part of the 1336 PLUS AC drive; it carries 18 connecting pins that are used as terminal TB2 for control and input signals exchange. The 1336S-MCB-SP2A terminals are used for potentiometer (pins 1,2, and 3: external speed reference, 10 k Ohm potentiometer required), analog input (pins 4, 5, and 6: 0 to 10 Volts DC or 4 to 20 mA), pulse Input for frequency reference (pins 7 and 8: externally powered square-wave pulse - 5V TTL logic), analog output (pin 9: Jumper JP1 to select 0 to 10V DC output, jumper JP2 to select 0 to 20mA output), CR1 to CR4 programmable relay contacts (pins 10 to 18: Fault, alarm, run signals or programmable). There is a red LED on the MCB that shows the status of the CR3 contact (LED active when contacts between terminals 13 and 14 are closed and contacts between terminals 14 and 15 are open).



This 1336S-MCB-SP2A main circuit board should be replaced if the following errors take place on the 1336 PLUS adjustable frequency AC drive: 51 - BGND 10ms Over, 32 - EEprom Fault, 52 - FGND 10ms Over, 30 - Hertz Sel Fault, 24 - Motor Mode Flt, 26 - Power Mode Fault, or 68 - ROM or RAM Flt. Wiring instructions are to use 0.30 millimeters squared to 2.1 millimeters squared (14 AWG to 22 AWG) wires. Maximum torque for 18 terminals installed on this main circuit board is 1.36 N-m (12 pounds on an inch). Copper wire should be only used. When connecting these terminals to an external electric circuit or device, ground the common or 0 Volts line at the device (source) end only.



Technical Description of 1336S-MCB-SP2A

Allen-Bradley 1336 PLUS Drive with Circuit Board part with Main Control Functions

Repair Services for 1336S-MCB-SP2A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 1336S-MCB-SP2A. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions for 1336S-MCB-SP2A

Please refer to the manual for more information about the 1336S-MCB-SP2A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-MCB-SP2A Ser A
1336S-MCB-SP2A/A, Series A, Rev A Request Quote
Common misspellings:
  • l336S-MCB-SP2A
  • 1336S-MC8-SP2A
  • 1336SMCBSP2A

Dimensions For 1336S-MCB-SP2A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336S-MCB-SP2A

Resolutions For 1336S-MCB-SP2A

About

Technical Specifications for 1336S-MCB-SP2A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-MCB-SP2A
Product Line1336 PLUS
Part TypeCircuit Board
Control FunctionMain Control
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1336S-MCB-SP2A
Product Line1336 PLUS
Part TypeCircuit Board
Control FunctionMain Control
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336S-MCB-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336S-MCB-SP2A units instead of migration.

About 1336S-MCB-SP2A

The Allen-Bradley 1336S-MCB-SP2A is a Main Circuit Board for 1336 PLUS Adjustable Frequency AC Drives. It is designed to be used with “A” frame sized adjustable frequency AC drives 0.37 to 7.5 kW (0.5 to 10 HP). The 1336S-MCB-SP2A main circuit board is located in the lower part of the 1336 PLUS AC drive; it carries 18 connecting pins that are used as terminal TB2 for control and input signals exchange. The 1336S-MCB-SP2A terminals are used for potentiometer (pins 1,2, and 3: external speed reference, 10 k Ohm potentiometer required), analog input (pins 4, 5, and 6: 0 to 10 Volts DC or 4 to 20 mA), pulse Input for frequency reference (pins 7 and 8: externally powered square-wave pulse - 5V TTL logic), analog output (pin 9: Jumper JP1 to select 0 to 10V DC output, jumper JP2 to select 0 to 20mA output), CR1 to CR4 programmable relay contacts (pins 10 to 18: Fault, alarm, run signals or programmable). There is a red LED on the MCB that shows the status of the CR3 contact (LED active when contacts between terminals 13 and 14 are closed and contacts between terminals 14 and 15 are open).



This 1336S-MCB-SP2A main circuit board should be replaced if the following errors take place on the 1336 PLUS adjustable frequency AC drive: 51 - BGND 10ms Over, 32 - EEprom Fault, 52 - FGND 10ms Over, 30 - Hertz Sel Fault, 24 - Motor Mode Flt, 26 - Power Mode Fault, or 68 - ROM or RAM Flt. Wiring instructions are to use 0.30 millimeters squared to 2.1 millimeters squared (14 AWG to 22 AWG) wires. Maximum torque for 18 terminals installed on this main circuit board is 1.36 N-m (12 pounds on an inch). Copper wire should be only used. When connecting these terminals to an external electric circuit or device, ground the common or 0 Volts line at the device (source) end only.



Technical Description of 1336S-MCB-SP2A

Allen-Bradley 1336 PLUS Drive with Circuit Board part with Main Control Functions
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 1336S-MCB-SP2A. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 1336S-MCB-SP2A. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Revisions

Please refer to the manual for more information about the 1336S-MCB-SP2A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1336S-MCB-SP2A Ser A
1336S-MCB-SP2A/A, Series A, Rev A Request Quote

Common misspellings:
  • l336S-MCB-SP2A
  • 1336S-MC8-SP2A
  • 1336SMCBSP2A
PDF