Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-A007-AA-EN-GM1-HCS2-L6

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-A007-AA-EN-GM1-HCS2-L6

|

The Allen-Bradley 1336F-A007-AA-EN-GM1-HCS2-L6 1336 Plus II high-performance variable speed drive is designed to meet the speed and torque control needs in modern motion control applications. This drive features robust protective features to ensure reliable operation, and it also offers real-time diagnostics. The 1336F-A007-AA-EN-GM1-HCS2-L6 drive can be programmed locally through a digital HMI or via a PLC or SLC controller with the built-in SCAN port communication interface.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-A007-AA-EN-GM1-HCS2-L6

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 PLUS II Drives
Part Number1336F-A007-AA-EN-GM1-HCS2-L6
Weight50.00 lbs (22.68 kg)
DescriptionAdjustable Frequency AC Drive
Voltage Range200 to 240 Volts AC
Output Power Rating5.5 Kilowatts, 7.5 Horsepower
Frame SizeB1/B2
HMIProgrammer/Controller with a Digital Pot
HMI LanguageEnglish
Control Interface Option115 Volts AC Control Board
Analog Interface Option (Slot A)None
Communication Option (Adapter 6)Single-Point Remote I/O Interface

The Allen-Bradley 1336F-A007-AA-EN-GM1-HCS2-L6 high-performance variable speed drive is designed to meet the speed and torque control requirements of modern industrial motion control applications. It is available from the 1336 Plus II series. The 1336F-A007-AA-EN-GM1-HCS2-L6 drive uses pulse width modulated output frequency for precise and reliable speed and torque control. It offers several enhanced drive functions, including the auto economizer, process PI control, sensor-enabled electronic overload, step logic, and the automatic tuning function for flexible and reliable operation. In addition to theses, the 1336F-A007-AA-EN-GM1-HCS2-L6 drive also offers several programmable features such as the 7 programmable preset speeds, last-state operation, pro-active current limiting action, flying start mode, slip compensation, dynamic braking, and the dual independently programmed acceleration and deceleration times. The 1336F-A007-AA-EN-GM1-HCS2-L6 drive’s built-in protective features include automatic bus voltage regulation, overcurrent protection, over-temperature protection, stall protection (overcurrent and overvoltage stall), ground fault protection, shorted circuit protection, encoder signal loss detection, and external signal loss detection.

The Allen-Bradley 1336F-A007-AA-EN-GM1-HCS2-L6 1336 Plus II series high-performance variable speed drive comes with several real-time preventive functions where the drive settings can be monitored in the background without interrupting the operation process and the operators will be alerted about any fault conditions via a simple diagnostic message. The 1336F-A007-AA-EN-GM1-HCS2-L6 drive has configurable standard digital and analog control outputs and inputs, and it comes with a programmable 115 Volts AC rated control interface for additional configuration options. It has a built-in SCAN port for remote programming and process monitoring. The 1336F-A007-AA-EN-GM1-HCS2-L6 drive comes with an additional single point Remote I/O interface option for an extended communication link.