Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-A007-AA-EN-GM1-L6E

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-A007-AA-EN-GM1-L6E

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 1336F-A007-AA-EN-GM1-L6E 1336 Plus II variable frequency drive comes with a NEMA Type 1 enclosure and IT must be installed in a clean and controlled environment. This drive has an output power rating of 7.5 Horsepower or 5.5 Kilowatts. The 1336F-A007-AA-EN-GM1-L6E drive comes with a 115 Volts AC and encoder feedback interface option.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-A007-AA-EN-GM1-L6E

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 PLUS II Drives
Part Number1336F-A007-AA-EN-GM1-L6E
Weight50.00 lbs (22.68 kg)
Voltage200-240V AC
Frequency47-63 Hz
Nominal Output Power Rating5.5 Kilowatts (7.5 Horsepower)
Enclosure TypeIP 20 (NEMA 1)
HMI LanguageEnglish
Communication OptionSingle-Point Remote I/O
Control Interface Option115V AC and Encoder Feedback Interface
Operating Temperature0 to 40 degrees Celsius
Efficiency97.5% at Rated Current
Heatsink ThermistorMonitored by Microprocessor
Request a Repair

The 1336F-A007-AA-EN-GM1-L6E drive is a 1336 Plus II series variable frequency drive that has been designed by Allen-Bradley/Rockwell Automation. This variable frequency drive is intended for applications with a variable speed motor. The speed, acceleration, and deceleration ratings of the variable speed motor vary according to the frequency that is being delivered to it by the drive. This drive has an operating frequency range of 50 to 60 Hertz with a tolerable frequency range of 47 to 63 Hertz. The Allen-Bradley/Rockwell Automation 1336F-A007-AA-EN-GM1-L6E variable frequency drive operates with a Horsepower output rating of 7.5 Horsepower and a voltage range of 200 to 240 Volts AC. When the drive operates within all of these ratings, it can provide an efficiency rating of 97.5 percent. The environmental conditions around the drive need to be taken into account to determine whether the drive is operating efficiently or not. This drive should not come into contact with liquids.

The Allen-Bradley/Rockwell Automation 1336F-A007-AA-EN-GM1-L6E 1336 Plus II series variable frequency drive must be installed in an environment where the ambient temperature does not exceed 40 degrees Celsius and that does not contain corrosive particles and vapors that could cause damage to the structure or internal components of the drive. The Allen-Bradley/Rockwell Automation 1336F-A007-AA-EN-GM1-L6E variable frequency drive comes with a single-point remote input and output communication option and a 115 Volts AC control interface that supports encoder feedback. The HMI language supported by this module is English. This drive needs to be included in a grounding system to reduce electromagnetic interference. This electromagnetic interference can affect the quality of data and communication signals and this will directly and negatively affect the overall operations of the drive and the system.