1336F-A007-AA-EN-HAS2-L4

The Allen-Bradley 1336F-A007-AA-EN-HAS2-L4 drive is a 1336 Plus II series variable-frequency drive. The drive contains ESD sensitive parts and therefore ESD precautions should be followed when installing or servicing this device. An incorrectly installed 1336F-A007-AA-EN-HAS2-L4 drive can lead to a reduction in operating lifespan or to component damage. Therefore, only trained and qualified technicians should install or service this drive. A nameplate located on the bottom of the drive chassis behind the cover helps to identify the drive and its operating parameters. The 1336F-A007-AA-EN-HAS2-L4 drive is designed for vertical mounting. The minimum horizontal spacing recommended by Allen-Bradley for adjacent drives is 4 inches while the minimum vertical spacing recommended by Allen-Bradley for adjacent drives is 6 inches. The input voltage range of the 1336F-A007-AA-EN-HAS2-L4 drive is from 200 to 240 Volts AC.

The Allen-Bradley 1336F-A007-AA-EN-HAS2-L4 1336 Plus II series drive can be directly connected to an AC input voltage source. However, in conditions where there are voltage transients or frequent power outages, installing an isolation transformer between the drive and the main AC power supply is recommended. Input short circuit protection is not available on the 1336F-A007-AA-EN-HAS2-L4 drive. Therefore, the drive should be installed with an input fuse or a circuit breaker. The output power rating of the drive is 7 Horsepower. The drive comes with English language support and it features a snap-in human-machine interface which includes a programmer/controller screen with digital potentiometer. The control interface that is supported by the 1336F-A007-AA-EN-HAS2-L4 drive is a TTL contact interface. The drive must be connected to system ground and a ground terminal is provided on the TB1 terminal block. Allen-Bradley recommends testing the ground impedance at regular intervals.