The Allen-Bradley 1336F-A007-AA-EN-HAS2-L4-MX3 drive is a 7 Horsepower rated adjustable-frequency AC drive. The product line to which the drive belongs is the 1336 PLUS II product line from Allen-Bradley/Rockwell Automation. The 1336 PLUS II series drives are available in 0.5 to 600 Horsepower output ratings and in AC and DC input versions. The 1336F-A007-AA-EN-HAS2-L4-MX3 drive is rated for 200 to 240 Volts AC input voltage. It should be mounted vertically with a minimum horizontal spacing of 101.6 millimeters between it and adjacent drives and a minimum vertical spacing of 152.4 millimeters between it and adjacent drives. The drive comes in an IP 20 rated NEMA Type 1 enclosure which is designed for indoor use only. The input current rating for the 1336F-A007-AA-EN-HAS2-L4-MX3 drive is 28 Amps and the output current rating is 27 Amps. The recommended maximum input circuit breaker size is 80 Amps.

The Allen-Bradley 1336F-A007-AA-EN-HAS2-L4-MX3 1336 PLUS II drive has a considerable level of immunity to externally generated interference. The drive can be installed with a radio-frequency interference (RFI) filter to control the flow of conducted emissions into the supply lines and ground wiring. The 1336F-A007-AA-EN-HAS2-L4-MX3 drive should not be operated at altitudes that exceed 3300 feet above sea level. The drive should only be operated at ambient temperatures between 32 and 104 degrees Fahrenheit. The displacement power factor of the 1336F-A007-AA-EN-HAS2-L4-MX3 drive is 0.95. The 1336 Plus II drives like the 1336F-A007-AA-EN-HAS2-L4-MX3 drive support sine-coded PWM control. The carrier frequency is programmable. The operating language supported by the drive is English. The HMI on the drive includes a programmer/controller device with a digital potentiometer. The control interface on the 1336F-A007-AA-EN-HAS2-L4-MX3 drive is a TTL contact interface. Only qualified personnel should install and operate the drive.