1336F-A007-AN-EN-L6-MX3

The 1336F-A007-AN-EN-L6-MX3 drive is a variable frequency drive. It is part of the 1336 Plus II drive product line from Allen-Bradley. The frame size of the drive is Size A4. The 1336F-A007-AN-EN-L6-MX3 drive’s protective enclosure is IP 00 rated and it is an open enclosure. This enclosure provides no protection from large solid particles or from liquids and the drive should therefore be mounted inside a cabinet for additional protection. The language supported by the 1336F-A007-AN-EN-L6-MX3 drive’s HMI is English. The control interface option available on the 1336F-A007-AN-EN-L6-MX3 variable frequency drive is a 115 Volts AC rated control interface. The input voltage rating of the drive is from 200 to 240 Volts AC. The drive supports both single-phase and 3-phase AC input voltage. However, the maximum output power rating of 7.5 Horsepower is available only when the drive is connected to 3-phase AC input voltage.

The recommended mounting orientation for the Allen-Bradley 1336F-A007-AN-EN-L6-MX3 1336 Plus II series drive is vertical. The minimum spacing requirements for proper heat dissipation include 152.4 millimeters of vertical spacing and 101.6 millimeters of horizontal spacing. Mounting A4 drives such as the 1336F-A007-AN-EN-L6-MX3 drive on combustible surfaces is not allowed. Both line fuses and circuit breakers can be used for protecting the drive input. Only the recommended types line fuses should be used for drive input protection. The drive is suitable for direct connection to an AC mains supply. However, a line reactor or isolation transformer may be required if the AC mains supply is prone to frequent voltage variations or spikes. The ambient operating temperature range for the drive is 0 to 50 degrees Celsius and the storage temperature range is -40 to 70 degrees Celsius. The 1336F-A007-AN-EN-L6-MX3 drive is UL listed and it is also certified by the CE and CSA standards. Only trained technicians should install the drive.