The 1336F-A007-AN-FR drive is an Allen-Bradley AC drive from the 1336 Plus II series. It is available in an IP 00 rated open enclosure. The frame size of the AC drive is Size A4. A nameplate is located on the bottom portion of the drive chassis behind the cover that makes the drive easy to identify. The 1336F-A007-AN-FR drive mounts vertically. The operating temperature range for the drive is 0 to 50 degrees Celsius. It should be mounted in a location where its minimum spacing requirements can be met to ensure that the ambient temperature remains within its permitted limits. The minimum spacing requirements for the drive are 4 inches between 2 drives mounted side by side, and 6 inches between drives that are mounted with one drive above the other. The 1336F-A007-AN-FR drive’s maximum output power rating is 5.5 kilowatts or 7.5 Horsepower. The input voltage range is from 200 to 240 Volts AC.

The Allen-Bradley 1336F-A007-AN-FR 1336 Plus II series AC drive is designed for connection to power supply systems with symmetrical voltages. Suitable isolation is required in situations where there is a potential for very high phase to ground voltages or where the ground is connected to other systems or equipment that could cause the ground potential to vary during drive operation. The HMI on the 1336F-A007-AN-FR drive supports the French language. The 1336F-A007-AN-FR drive is designed to trip at input voltages thresholds of 138 Volts AC undervoltage and 285 Volts AC overvoltage. The 1336F-A007-AN-FR drive is designed to trip if the DC bus voltage crosses the threshold values of 200 Volts DC or 405 Volts DC. A microprocessor on the 1336F-A007-AN-FR AC drive monitors the heatsink thermistor for overtemperature conditions.