1336F-A010-AA-EN-GM1-HASP-L6

The 1336F-A010-AA-EN-GM1-HASP-L6 drive is an Allen-Bradley 1336 Plus II variable frequency drive. It is used to control compatible motors in industrial applications. The input of the drive is compatible with AC power systems that support voltage ranges from 200 to 240 Volts AC. Both single-phase and 3-phase AC power systems are supported. However, the drive’s maximum output power rating of 7.5 Horsepower is only supported with 3-phase AC input voltage. The 1336F-A010-AA-EN-GM1-HASP-L6 drive has a NEMA Type 1 enclosure with an IP 20 environmental protection rating. This rating means that the drive enclosure provides the drive with limited protection against solid particles and no protection against liquids. Therefore, the drive should be installed inside a suitable control cabinet for a higher degree of protection in several applications and environments. The HMI on the drive includes a programmer-only option and upload/download capabilities. The drive HMI supports the English language.

The control interface options that are available on the Allen-Bradley 1336F-A010-AA-EN-GM1-HASP-L6 1336 Plus II variable frequency drive are rated for 115 Volts AC voltage. The communication module installed on the drive is a single-point remote I/O module. The 1336F-A010-AA-EN-GM1-HASP-L6 drive uses a natural convection method for cooling and it requires unobstructed airflow around it to maintain its ambient temperature within the required limits. Allen-Bradley recommends that the drive be installed in a vertical orientation. Moreover a minimum of 4 inches of space should be provided between 2 drives that are installed side by side. Allen-Bradley also recommends a minimum spacing of 6 inches on the top and bottom sides of a mounted drive. The optimal operating temperature range for the 1336F-A010-AA-EN-GM1-HASP-L6 drive is from 0 to 40 degrees Celsius. The frame size of the drive is Size A4 and its weight is 15.9 kilograms.