1336F-A010-AA-EN-GM2

The Allen-Bradley 1336F-A010-AA-EN-GM2 drive is an AC drive from the Allen-Bradley/Rockwell Automation 1336 Plus II series with adjustable frequency. For enhanced drive performance, it incorporates sensorless vector control technology as well as the standard Volts/Hertz control mode. The 1336F-A010-AA-EN-GM2 drive is a smart drive that provides a single solution for a variety of industrial motor control requirements across a wide range of applications. The 1336F-A010-AA-EN-GM2 adjustable frequency drive can support a maximum output power rating of 7.5 kilowatts or 10 Horsepower at a 3-phase operational voltage range of 200 to 240 Volts AC and at 50 to 60 Hertz. The 1336F-A010-AA-EN-GM2 drive is protected by tripping mechanisms that will activate in the event of overvoltage or undervoltage situations at 285 Volts AC and 138 Volts AC, respectively.

The Allen-Bradley 1336F-A010-AA-EN-GM2 1336 Plus II AC drive comes in an IP 20-rated enclosure and it has an operating temperature range of 0 to 40 degrees Celsius. The IP 20 or NEMA Type 1 enclosure for this drive offers some protection against dust and small debris and it prevents the users from touching the hazardous parts of the drive. The drive should not be installed in environments containing volatile or corrosive chemicals and liquids. As a standard factory option, the 1336F-A010-AA-EN-GM2 drive includes a serial communication interface that supports the DF1 and DH485 communication protocols. Since the drive does not come with an HMI, the HMI opening on the front cover of the drive's enclosure must be properly covered with a snap-in blank plate to keep out dust and moisture. The 1336F-A010-AA-EN-GM2 drive is a B-frame drive and its nameplate is located on the main control board. An aluminum heatsink is located at the bottom of this B-frame drive.