Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-A010-AA-EN-HAS1

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-A010-AA-EN-HAS1

|
Need a Specific Revision?

The 1336F-A010-AA-EN-HAS1 1336 Plus II drive is a microprocessor-based PWM AC drive with programmable frequency. This 3-phase drive can handle up to 10 Horsepower or 7.5 kilowatts of output power and runs on an input voltage range of 200 to 240 Volts AC. Its frame size is B1/B2 and its enclosure protection rating is IP 20.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-A010-AA-EN-HAS1

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 PLUS II Drives
Part Number1336F-A010-AA-EN-HAS1
Weight50.00 lbs (22.68 kg)
DescriptionAdjustable Frequency AC Drive
Voltage200-240V AC
Phases3
Output Power Rating7.5 Kilowatts (10 Horsepower)
Enclosure TypeIP 20 (NEMA Type 1)
LanguageEnglish
HMIProgrammer/Controller with Analog Pot
Control Interface OptionsNone
Frame SizeB1/B2
CertificationsUL Listed, CSA Certified
Request a Repair

The 1336F-A010-AA-EN-HAS1 drive is an AC drive from the 1336 Plus II series that has been designed and manufactured by Allen-Bradley/Rockwell Automation. This variable frequency AC drive has a carrier frequency range of 2 to 8 kilohertz. The input voltage range for this 3-phase drive is from 200 to 240 Volts AC. This drive can also operate with single-phase voltage, but only with a 50 percent derating in its output. The 1336F-A010-AA-EN-HAS1 drive is designed for use with AC induction motors that are rated at 10 Horsepower of output or less. The drive has the sensorless vector control option which delivers more torque and a starting acceleration level of up to 250 percent, and which also delivers continuous torque over a 120:1 speed range. The 1336F-A010-AA-EN-HAS1 variable frequency AC drive also comes with dual acceleration and deceleration profiles, DC injection braking, dynamic braking, slip compensation, and 7 preset speeds.

The Allen-Bradley/Rockwell Automation 1336F-A010-AA-EN-HAS1 frequency drive from the 1336 Plus II series uses sinusoidal Pulse Width Modulation (PWM). It is a general-purpose drive module with a NEMA Type 1 or IP 20 rated enclosure and a Size B1/B2 frame. The enclosure protects the 1336F-A010-AA-EN-HAS1 drive against accidental contact as well as against dust and objects that are larger than 12 millimeters in size. It should be stored in a clean and dry environment at temperatures ranging from 0 to 40 degrees Celsius and relative humidity levels ranging from 5 to 95 percent without condensation. The 1336F-A010-AA-EN-HAS1 drive is outfitted with a removable, drive-mounted HMI or human-machine interface module that allows for easy programming. The HMI has an LCD to display drive status updates and fault conditions, and it has an analog potentiometer. There are no factory-installed communication or control interface options on the drive.