1336F-A010-AA-EN-HASB-L6

The Allen-Bradley 1336F-A010-AA-EN-HASB-L6 adjustable frequency AC drive is a 3-phase PWM AC drive that has been designed and manufactured as part of the Allen-Bradley/Rockwell Automation 1336 Plus II drive series. The microprocessor-based AC drives from the 1336 Plus II drive series like the 1336F-A010-AA-EN-HASB-L6 drive all feature a common type of design and they are all manufactured with compact and condensed drive packaging so that they can be installed in virtually any application system. The 1336F-A010-AA-EN-HASB-L6 drive offers a long list of specialized functions, and among these functions is the auto economizer function, which helps to reduce energy consumption and to save operating costs. It can operate at an ambient temperature of 0 to 40 degrees Celsius. The 1336F-A010-AA-EN-HASB-L6 adjustable frequency AC drive also features the proportional and integral gain adjustment function, which allows for simple process control such as monitoring device feedback and adjusting the drive’s output to match the application feedback needs.

The 1336F-A010-AA-EN-HASB-L6 1336 Plus II drive has a wide range of programmable drive features which include dual programmable acceleration/deceleration times (programmable from 0 to up to 3600 seconds), the flying start which automatically detect the speed and direction of a spinning load and begins its output from that speed, and the slip compensation mode which enhances torque performance at all speeds. The 1336F-A010-AA-EN-HASB-L6 drive also has several protective and diagnostic functions. Among these are the programmable current limit capability and auto Bus regulation. The 1336F-A010-AA-EN-HASB-L6 drive also offers ground fault and short-circuit trips, and it provides transient protection at up to 6000 Volts per the IEEE C62.41-1991 standards. The 1336F-A010-AA-EN-HASB-L6 drive offers flexibility in its motor control methods. Based on application specifications, the operators can choose between the sensorless vector control  mode which offers tighter torque control at very low speeds and the fully customizable Volts/Hertz control mode. The drive comes with a 115 Volts AC control interface board, but it does not have a built-in HMI. An optional HMI can be installed in the snap-in HMI cradle of this drive if required.