Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-A010-AA-EN-HCSP-L6

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-A010-AA-EN-HCSP-L6

|
Need a Specific Revision?

The Allen-Bradley 1336F-A010-AA-EN-HCSP-L6 1336 Plus II drive is an AC drive. It operates at 200 to 240 Volts AC voltage. The Horsepower output power rating of the 1336F-A010-AA-EN-HCSP-L6 drive is 10 Horsepower.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-A010-AA-EN-HCSP-L6

ManufacturerAllen Bradley
Product TypeAC Drive
Product Line1336 PLUS II Drives
Part Number1336F-A010-AA-EN-HCSP-L6
Weight50.00 lbs (22.68 kg)
Input Voltage200 to 240 Volts AC
Output Power Rating10 Horsepower (7.5 Kilowatts)
Protection RatingIP 20
Frame SizeB1
MountingVertical
HMI LanguageEnglish
HMIProgrammer Only with Upload/Download Capability
Control Interface115 Volts AC
Maximum Output Frequency400 Hertz
Request a Repair

The Allen-Bradley/Rockwell Automation 1336F-A010-AA-EN-HCSP-L6 drive is a 1336 Plus II series AC drive. It is a variable-frequency AC drive that can vary its output frequency to control the speed of the connected motor. The motor control method that the drive supports is sine-coded PWM motor control. The carrier frequency can be set to values ranging from 2 to 8 kilohertz. The drive specifications listed in the Allen-Bradley manual for the drive are based on 4 kilohertz of carrier frequency. The output power of the 1336F-A010-AA-EN-HCSP-L6 drive is 7.5 kilowatts or 10 Horsepower when 3-phase AC input voltage is applied to the drive. The output drops to 50% of the highest rating when single-phase AC input voltage is applied to the drive.  The mains AC supply that powers the drive should operate at 200 to 240 Volts AC. The 1336F-A010-AA-EN-HCSP-L6 AC drive input can tolerate a maximum variation of 10% in the AC voltage supply.

The Allen-Bradley/Rockwell Automation 1336F-A010-AA-EN-HCSP-L6 1336 Plus II drive draws 35 Amps of current when it is operating in the constant torque mode. The drive draws 12 to 14 kVA of power when it is operating in the constant torque mode. The output current and power ratings for the constant torque mode are 34 Amps and 14 kVA, respectively. The 1336F-A010-AA-EN-HCSP-L6 drive draws 35 Amps of current when operating in the variable torque mode. The drive also draws 14 kVA of power when operating in the variable torque mode. The minimum voltage rating at the drive output is 0 Volts. The maximum voltage rating at the output of the 1336F-A010-AA-EN-HCSP-L6 drive is the rated voltage. The minimum rated output frequency is 0 Hertz and the maximum rated output frequency is 400 Hertz. The protective enclosure of the AC drive is IP 20 rated. The HMI for this drive is a programmer-only HMI that has upload/download capabilities. The control interface is rated at 115 Volts AC voltage.