Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-A010-AA-EN-L6E

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-A010-AA-EN-L6E

|
Need a Specific Revision?

The Allen-Bradley 1336F-A010-AA-EN-L6E 1336 Plus II drive is an AC drive. It is rated for 10 Horsepower of maximum output. The environmental protection rating of the drive housing is IP 20.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-A010-AA-EN-L6E

ManufacturerAllen Bradley
Product TypeAC Drive
Product Line1336 PLUS II Drives
Part Number1336F-A010-AA-EN-L6E
Weight40.00 lbs (18.14 kg)
Protection RatingIP 20
Frame SizeB1
Input Voltage200 to 240 Volts AC
Output Power Rating10 Horsepower (7.5 Kilowatts)
MountingVertical
Operating Temperature0 to 40 degrees Celsius
HMI LanguageEnglish
Control Interface115 Volts AC with Encoder Feedback
Request a Repair

The Allen-Bradley 1336F-A010-AA-EN-L6E drive is 1336 Plus II series adjustable frequency drive. The 1336F-A010-AA-EN-L6E drive is designed for 200 to 240 Volts AC operating input voltage with an operating frequency range of 50 to 60 Hertz and a frequency tolerance range of 47 to 63 Hertz. The drive’s maximum output power rating is 10 Horsepower or 7.5 Kilowatts with 3-phase AC input voltage. The enclosure of the 1336F-A010-AA-EN-L6E adjustable frequency drive is IP 20 or NEMA Type 1 rated. The control interface option for the drive is a 115 Volts AC rated interface that supports encoder feedback. English is the operating language that is supported by the control interface of the drive. The 1336F-A010-AA-EN-L6E adjustable frequency drive can operate at 0 to 40 degrees Celsius or 32 to 104 degrees Fahrenheit.

The nameplate on the Allen-Bradley 1336F-A010-AA-EN-L6E 1336 Plus II adjustable frequency drive is located on the mounting plate of the main control board. The drive is suitable for use on a circuit that can deliver a maximum of 200,000 RMS symmetrical Amps of current at 600 Volts. The drive can be directly connected to the AC mains supply in a system. Input power conditioning can be used if required. Since input short circuit protection is not supported by the drive, a suitable fuse or circuit breaker can be used for input protection. The 1336F-A010-AA-EN-L6E drive has a high level of immunity to externally generated electromagnetic interference. Allen-Bradley recommends suppressing coils of DC energized contactors to protect the drive against electrical transients. The 1336F-A010-AA-EN-L6E drive should be connected to ground at the PE terminal that is provided on the TB1 terminal block. Only trained and qualified technicians should install and operate the drive.