Designed by Allen-Bradley, the 1336F-A010-AE-EN-HCS1-L6 drive is a 1336 Plus II drive that comes with a metal oxide varistor or MOV for providing voltage surge suppression. The MOV also provides the unit with phase-to-phase and phase-to-ground protection that is designed to meet the IEEE 587 standards. The 1336F-A010-AE-EN-HCS1-L6 drive also features drive start and stop circuitry that includes solid-state components. Note that an incorrectly applied or installed bypass system can result in component damage. To ensure the proper installation of the 1336F-A010-AE-EN-HCS1-L6 drive, only qualified technicians should install, test, service, and repair the unit.

The 1336F-A010-AE-EN-HCS1-L6 drive also features electrical Interference immunity. The unit does not require other special precautions beyond those that are provided in the installation handbook. To avoid interference with the nearby sensitive equipment, pay careful attention to the arrangement of power and the ground connections. Ensure that the ground conductor of the motor cable is connected to the drive’s ground terminal directly. Use shielded or armored cables to connect to the drive ground terminal and the motor ground as per the manufacturer’s instructions. The 1336F-A010-AE-EN-HCS1-L6 drive is an English version drive and it comes with 10 Horsepower. It features the IP 20 (NEMA) type 1 enclosure and it is built with the HCS1 programmer or controller with an analog pot and uploading and downloading capability. The 1336F-A010-AE-EN-HCS1-L6 drive features the 115 Volts AC control option and has a voltage range of 200 to 240 Volts AC. The 1336F-A010-AE-EN-HCS1-L6 drive features the Volts per Hertz control that offers full programmability which allows for maximum performance for the applications that require multiple motors. The 1336F-A010-AE-EN-HCS1-L6 drive comes with motor overload protection.