The Allen-Bradley 1336F-A010-AE-EN-HCSP-L4 drive is a 1336 Plus II series variable frequency drive. It is capable of constant torque operation and variable torque operation. The rated output for the constant torque mode is 10 Horsepower. This power output level is delivered by the 1336F-A010-AE-EN-HCSP-L4 drive when its input is connected to 3-phase AC power supplies. The input of the drive can also be connected to single-phase AC power supplies. However, doing so leads to 50% derating at the drive output. The frame size of the drive according to the Allen-Bradley classification system is Size B1. The drive nameplate is located on the mounting plate of the main control board. The shipping weight of the drive is approximately 50 pounds. The approximate dimensions of the 1336F-A010-AE-EN-HCSP-L4 drive are 18.75 x 10.9 x 3.7 inches.

The Allen-Bradley 1336F-A010-AE-EN-HCSP-L4 1336 Plus II drive’s operating voltage range is from 200 to 240 Volts AC. The integrated HMI on the drive is a programmer HMI and it supports upload and downloading. The HMI is located on the front panel and it includes a display and a keypad. The display can be used for monitoring the drive’s parameters. The keypad on the HMI can be used to issue commands and change the drive’s configuration. The HMI supports the English language. The housing of the 1336F-A010-AE-EN-HCSP-L4 drive is IP 20 rated. The control interface that is installed on the 1336F-A010-AE-EN-HCSP-L4 drive is a TTL contact interface. The 1336F-A010-AE-EN-HCSP-L4 drive is designed for environments where the operating temperature range is between 0 and 40 degrees Celsius. The maximum recommended operating altitude is 1000 meters.