The Allen-Bradley 1336F-A010-AE-ES-HAS1-L6E drive is a 1336 Plus II series adjustable frequency drive. The drive supports a built-in HMI with a programmer/controller option. The HMI also supports an analog potentiometer. The control interface option that is available on the drive is an encoder feedback device with 115 Volts AC rated voltage. The encoder feedback device enables the drive to receive feedback about speed and position from a connected motor. The 1336F-A010-AE-ES-HAS1-L6E drive can then adjust its output to control the motor speed and other parameters to bring them in line with the programmed motor parameters. The language that is supported on the HMI is Spanish. The 1336F-A010-AE-ES-HAS1-L6E drive housing has an IP 20 environmental protection rating. The enclosure complies with the EMC requirements which are required for CE conformance.

The input voltage rating of the Allen-Bradley 1336F-A010-AE-ES-HAS1-L6E 1336 Plus II drive is from 200 to 240 Volts AC. With 3-phase input voltage, the constant torque output power rating of the drive is 10 Horsepower. With single-phase input voltage, the constant torque output power rating of the drive is 5 Horsepower. The 1336F-A010-AE-ES-HAS1-L6E drive is also capable of variable torque operation. Input protection is provided through the trip threshold settings. The drive is set to trip at 138 Volts AC and at 285 Volts AC. The drive is also set to trip at DC bus trip thresholds of 200 Volts DC and 405 Volts DC. The nominal value of the DC bus voltage on the 1336F-A010-AE-ES-HAS1-L6E drive is 324 Volts DC. The temperature of the heatsink on the drive is monitored by a microprocessor. The 1336F-A010-AE-ES-HAS1-L6E drive is UL listed and CSA certified.