1336F-A010-AN-EN-GM1-HCS1

The Allen-Bradley 1336F-A010-AN-EN-GM1-HCS1 1336 Plus II series drive is an advanced AC drive. It has been developed for industrial motor control applications. The 1336F-A010-AN-EN-GM1-HCS1 drive is a variable-frequency drive, which means that the output frequency can be changed to vary the motor speed. The frequencies at the drive output can be adjusted from 0 to 400 Hertz. The range of output voltage is from 0 to the rated drive voltage. The 1336F-A010-AN-EN-GM1-HCS1 drive can operate in a constant torque mode and in a variable torque mode. The input voltage range for which the drive is designed is 200 to 240 Volts AC. The input frequency range for which the drive is designed is 47 to 63 Hertz. The drive is compatible with single-phase and 3-phase AC systems. The maximum rated power output of the 1336F-A010-AN-EN-GM1-HCS1 drive is 10 Horsepower.

The frame size of the Allen-Bradley 1336F-A010-AN-EN-GM1-HCS1 1336 Plus II series drive is Size B1. The environmental protection rating of the drive’s enclosure is IP 00. This means that the drive enclosure is open. An integrated HMI is provided on the drive. The HMI is a programmer/controller HMI with an analog potentiometer. The HMI also supports uploading and downloading capabilities. Several optional communication modules can be installed on the drive. The 1336F-A010-AN-EN-GM1-HCS1 drive comes with a single-point remote I/O module. The 1336F-A010-AN-EN-GM1-HCS1 drive must be mounted in a vertical orientation with adequate free space on all sides of it so that air can flow freely and the heat generated during operation can be dissipated. If the drive is not properly ventilated, it could overheat and malfunction or suffer damage.