1336F-A010-AN-EN-GM1-HCS2

The Allen-Bradley 1336F-A010-AN-EN-GM1-HCS2 1336 Plus II series drive is a 10 Horsepower-rated adjustable frequency drive. It is designed for single-phase and 3-phase input voltage rated at 200 to 240 Volts AC. Note that the full rated output is possible only with 3-phase input voltage and that single-phase input voltage leads to 50% output derating. The 1336F-A010-AN-EN-GM1-HCS2 drive drive HMI is a programmer/controller HMI and a digital potentiometer. The HMI supports the English language. A single-point remote I/O communication module is also installed on the drive. The enclosure of the 1336F-A010-AN-EN-GM1-HCS2 drive is open and it has an IP 00 protection rating. This rating means that the drive is completely unprotected from liquids and large debris. An industrial cabinet can be used to mount the drive and provide it with the required level of protection. The drive cannot be used outdoors. The drive nameplate is located on the main control board.

Allen-Bradley has designed the 1336F-A010-AN-EN-GM1-HCS2 1336 Plus II series drive for vertical mounting. The mounting recommendations for this drive for proper heat dissipation include 4 inches of horizontal spacing and 6 inches of vertical spacing between it and any adjacent devices. Input power conditioning can be used when connecting to AC supplies with spikes and transients. Input filters can be used to reduce harmonics and radio interference. Allen-Bradley has specified the appropriate size of the fuse that is to be used for short-circuit protection on the 1336F-A010-AN-EN-GM1-HCS2 drive. Input overvoltage and undervoltage protection is also available and the respective trip thresholds are 285 Volts AC and 138 Volts AC. The nominal bus voltage rating is 324 Volts DC. The 1336F-A010-AN-EN-GM1-HCS2 drive is configured to trip at DC bus overvoltage/undervoltage thresholds of 405 Volts DC/200 Volts DC.