The Allen-Bradley 1336F-A010-AN-EN-GM5-HAS2-L5 drive is a 1336 Plus II series AC drive in an IP 00 rated enclosure. The 1336F-A010-AN-EN-GM5-HAS2-L5 drive features a DeviceNet communication interface module. This drive also supports a 24 Volts AC/DC rated control interface and it features a programmer and controller type of human-machine interface or HMI that is equipped with a digital potentiometer. The drive HMI supports the English language. The output power rating of the drive is 10 Horsepower maximum with 3-phase input voltage rated at 200 to 240 Volts AC. Note that the 1336F-A010-AN-EN-GM5-HAS2-L5 drive contains ESD-sensitive parts and therefore the technicians who are working on the drive should follow all of the standard ESD precautions. An incorrectly installed drive can lead to component damage and/or a reduction in the drive’s operating lifespan. As a result, the planning and execution of the drive’s installation process should be performed by trained and qualified technicians only 

The Allen-Bradley 1336F-A010-AN-EN-GM5-HAS2-L5 1336 Plus II series AC drive components can carry voltages in excess of 50 Volts that can lead to electric shock. Therefore, the technicians who are performing maintenance on the 1336F-A010-AN-EN-GM5-HAS2-L5 drive should only begin the maintenance process after powering off the drive and waiting for a sufficient time to pass to allow the capacitors to discharge their power completely. The voltage on the bus capacitors should also be checked at the terminals that are specifically provided for this purpose. The open and IP 00 rated drive enclosure is only meant to be used indoors. It is recommended to mount the 1336F-A010-AN-EN-GM5-HAS2-L5 drive inside a suitable cabinet that has a higher protection rating than its enclosure in most environments and applications for additional protection.