1336F-A010-AN-EN-HAS1 | Allen Bradley Drives 1336 PLUS II Drives

1336F-A010-AN-EN-HAS1

Rated 4.6 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336F-A010-AN-EN-HAS1

Description: The 1336F-A010-AN-EN-HAS1 drive is a 1336 Plus II series motor control drive that has been manufactured by Allen-Bradley. It operates at 200 to 240 Volts AC and 7.5 Kilowatts or 10 Horsepower of maximum output power. Its frame size is classified as B1/B2 and it features an open-style IP 00 enclosure.
Call
Request a quote for 1336F-A010-AN-EN-HAS1

Description:

The 1336F-A010-AN-EN-HAS1 drive is a 1336 Plus II series motor control drive that has been manufactured by Allen-Bradley. It operates at 200 to 240 Volts AC and 7.5 Kilowatts or 10 Horsepower of maximum output power. Its frame size is classified as B1/B2 and it features an open-style IP 00 enclosure.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336F-A010-AN-EN-HAS1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 13 reviews

    Technical Specifications for 1336F-A010-AN-EN-HAS1

BrandAllen-Bradley / Rockwell Automation
Series1336 PLUS II Drives
Part Number1336F-A010-AN-EN-HAS1
DescriptionAdjustable Frequency AC Drive
Voltage200-240V AC
Phases3
Power Rating7.5 Kilowatts (10 Horsepower)
Enclosure TypeIP 00 (Open)
Frame SizeB1/B2
HMIProgrammer/Controller with Analog Potentiometer
Control Interface OptionsNone
CertificationsUL Listed, CSA Certified
BrandAllen-Bradley / Rockwell Automation
Series1336 PLUS II Drives
Part Number1336F-A010-AN-EN-HAS1
DescriptionAdjustable Frequency AC Drive
Voltage200-240V AC
Phases3
Power Rating7.5 Kilowatts (10 Horsepower)
Enclosure TypeIP 00 (Open)
Frame SizeB1/B2
HMIProgrammer/Controller with Analog Potentiometer
Control Interface OptionsNone
CertificationsUL Listed, CSA Certified
s

About 1336F-A010-AN-EN-HAS1

The 1336F-A010-AN-EN-HAS1 drive is an AC variable frequency drive from the Allen-Bradley 1336 Plus II series that is rated for 7.5 kilowatts or 10 Horsepower of maximum output power. It is a flexible and easy-to-use digital drive that is typically used in general-purpose applications like applications in pumps, fans, and conveyor systems. The rated operating voltage range of this drive is 200 to 240 Volts AC at 47 to 63 Hertz. The 1336F-A010-AN-EN-HAS1 drive comes in a compact and robust frame which is a Size B2 frame and it has an IP 00 environmental protection rating. The drive-specific operational data and ratings of this variable frequency drive are listed on the nameplate of the device, which is located on the bottom of the drive’s main control board. The 1336F-A010-AN-EN-HAS1 AC variable frequency drive comes with a 12 to 14 kVA input kVA rating and an input current rating of 35 Amps.



The Allen-Bradley 1336F-A010-AN-EN-HAS1 1336 Plus II series drive is equipped with protective features which detect and trip the drive in adverse conditions like undervoltage, overvoltage, overcurrent, and over-temperature situations. The drive's overvoltage and undervoltage trips are triggered when the input voltage level reaches 285 Volts AC and 138 Volts AC, respectively. This 1336 Plus II series AC drive comes with a human-machine interface module or HMI as a factory-mounted interface option. The HMI provided with this drive is a drive-mounted programmer interface that consists of an analog speed potentiometer with a NEMA Type 1 enclosure rating. The 1336F-A010-AN-EN-HAS1 drive must be operated within a temperature range of 0 to 50 degrees Celsius for optimal performance. The maximum wire size that the drive can accommodate at its TB1 terminal block is 13.3 square millimeters and its maximum wire torque rating is 1.70 N-m.



Repair Services for 1336F-A010-AN-EN-HAS1

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336F-A010-AN-EN-HAS1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1336F-A010-AN-EN-HAS1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336F-A010-AN-EN-HAS1

Resolutions For 1336F-A010-AN-EN-HAS1

About

Technical Specifications for 1336F-A010-AN-EN-HAS1

BrandAllen-Bradley / Rockwell Automation
Series1336 PLUS II Drives
Part Number1336F-A010-AN-EN-HAS1
DescriptionAdjustable Frequency AC Drive
Voltage200-240V AC
Phases3
Power Rating7.5 Kilowatts (10 Horsepower)
Enclosure TypeIP 00 (Open)
Frame SizeB1/B2
HMIProgrammer/Controller with Analog Potentiometer
Control Interface OptionsNone
CertificationsUL Listed, CSA Certified
BrandAllen-Bradley / Rockwell Automation
Series1336 PLUS II Drives
Part Number1336F-A010-AN-EN-HAS1
DescriptionAdjustable Frequency AC Drive
Voltage200-240V AC
Phases3
Power Rating7.5 Kilowatts (10 Horsepower)
Enclosure TypeIP 00 (Open)
Frame SizeB1/B2
HMIProgrammer/Controller with Analog Potentiometer
Control Interface OptionsNone
CertificationsUL Listed, CSA Certified

About 1336F-A010-AN-EN-HAS1

The 1336F-A010-AN-EN-HAS1 drive is an AC variable frequency drive from the Allen-Bradley 1336 Plus II series that is rated for 7.5 kilowatts or 10 Horsepower of maximum output power. It is a flexible and easy-to-use digital drive that is typically used in general-purpose applications like applications in pumps, fans, and conveyor systems. The rated operating voltage range of this drive is 200 to 240 Volts AC at 47 to 63 Hertz. The 1336F-A010-AN-EN-HAS1 drive comes in a compact and robust frame which is a Size B2 frame and it has an IP 00 environmental protection rating. The drive-specific operational data and ratings of this variable frequency drive are listed on the nameplate of the device, which is located on the bottom of the drive’s main control board. The 1336F-A010-AN-EN-HAS1 AC variable frequency drive comes with a 12 to 14 kVA input kVA rating and an input current rating of 35 Amps.



The Allen-Bradley 1336F-A010-AN-EN-HAS1 1336 Plus II series drive is equipped with protective features which detect and trip the drive in adverse conditions like undervoltage, overvoltage, overcurrent, and over-temperature situations. The drive's overvoltage and undervoltage trips are triggered when the input voltage level reaches 285 Volts AC and 138 Volts AC, respectively. This 1336 Plus II series AC drive comes with a human-machine interface module or HMI as a factory-mounted interface option. The HMI provided with this drive is a drive-mounted programmer interface that consists of an analog speed potentiometer with a NEMA Type 1 enclosure rating. The 1336F-A010-AN-EN-HAS1 drive must be operated within a temperature range of 0 to 50 degrees Celsius for optimal performance. The maximum wire size that the drive can accommodate at its TB1 terminal block is 13.3 square millimeters and its maximum wire torque rating is 1.70 N-m.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336F-A010-AN-EN-HAS1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336F-A010-AN-EN-HAS1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF