1336F-A010-AN-EN-HASP-L4

The Allen-Bradley 1336F-A010-AN-EN-HASP-L4 1336 Plus II variable speed drive is designed for applications in a high-performance industrial motion control system. This microprocessor-based digital PWM drive is designed to provide exceptional output control for industrial 3-phase AC motors. The 1336F-A010-AN-EN-HASP-L4 drive provides adjustable frequency and voltage outputs that can be tuned to provide optimum performance for any load conditions. The 1336F-A010-AN-EN-HASP-L4 drive provides a wide range of built-in protection features. It offers AC overvoltage and under-voltage trip ratings of 285 Volts AC and 138 Volts AC, respectively. It also provides auto-BUS voltage regulation with trip limits between 200 Volts DC and 405 Volts DC (324 Volts DC nominal Bus voltage). The 1336F-A010-AN-EN-HASP-L4 drive offers digitally-monitored over-temperature trips via a heatsink thermistor. It also has a programmable current limit action with an instantaneous current limit rating of 220% to 300% of the VT rated current. It has a short-circuit rip rating of up to 200,000 Amps and a line transient protection rating of up to 6000 Volts.

The Allen-Bradley 1336F-A010-AN-EN-HASP-L4 1336 Plus II variable speed drive has a power loss ride-through rating of 15 milliseconds at a full load and a maximum logic ride-through rating of 2 seconds (typical). The 1336F-A010-AN-EN-HASP-L4 drive features dual programmable acceleration and deceleration times which are programmable from 0 to 3600 seconds in 0.1-second increments. It also features 7 programmable preset speeds, which are programmed as default inputs. The 1336F-A010-AN-EN-HASP-L4 drive offers specialized functions (including the “auto economizer,” “process PI controller,” “traverse function,” “auto tuning,” and “step logic” functions) to help reduce the configuration time, energy consumption, and operating costs. The 1336F-A010-AN-EN-HASP-L4 drive comes in a compact package that does not require a lot of panel space for installation. It has an IP 00 (open) enclosure rating and it is designed for use within a 0 to 50 degrees Celsius ambient temperature range.