Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-A010-AN-EN-HCS2-L9E

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-A010-AN-EN-HCS2-L9E

|
Need a Specific Revision?

The 1336F-A010-AN-EN-HCS2-L9E drive is a 1336 Plus II series Allen-Bradley/Rockwell Automation drive with dynamic current control and an HMI. The drive’s HMI is a programmer or controller HMI with a digital pot. It also has a control interface that is rated at 115 Volts AC.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-A010-AN-EN-HCS2-L9E

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 PLUS II Drives
Part Number1336F-A010-AN-EN-HCS2-L9E
Weight50.00 lbs (22.68 kg)
Voltage Rating200 to 240 Volts AC
Power Rating7.5 Kilowatts (10 Horsepower)
EnclosureIP 00 (Open)
LanguageEnglish
Control Interface115 Volts AC and Encoder Feedback for use with Encoder Loss Detection
Analog InterfaceNone
HMIProgrammer/Controller with Digital Pot and Upload/Download Capability
Communication CardNone
Operating Temperature0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit)
Storage Temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Relative Humidity5 to 95% (Non-Condensing)
Maximum Altitude1000 Meters (3300 Feet)
CertificationsUL, CSA, CE
Request a Repair

The product code 1336F-A010-AN-EN-HCS2-L9E is reserved for an Allen-Bradley/Rockwell Automation 1336 Plus II series AC drive that operates on power sources rated at 200 to 240 Volts AC. The 1336F-A010-AN-EN-HCS2-L9E drive features sensorless vector control that gives it an advanced level of torque performance with up to 250% torque, and various other enhancements in regard to overall drive performance. The drive’s high torque ratings allow it to be incorporated into systems that move different-sized loads. The 1336F-A010-AN-EN-HCS2-L9E drive also supports selectable Volts per Hertz control in addition to sensorless vector control. The selectable Volts per Hertz control mode provides the drive with complete operating functionalities through functions like the boost slope, start boost/run boost, and the Volts per Hertz control operation in a full custom mode.

The Allen-Bradley/Rockwell Automation 1336F-A010-AN-EN-HCS2-L9E 1336 Plus II series drive is ideal for monitoring, controlling, and programming applications in an AC motor system. It reduces the risks of system faults that can stop or damage the entire system for a long period of time because it includes a variety of protective functions. The list of protective functions includes detection and trip functions for over-current stall errors and overvoltage stall errors. The 1336F-A010-AN-EN-HCS2-L9E drive’s operating voltage range of 200 to 240 Volts AC is accompanied by a frequency tolerance range of 47 to 63 Hertz. The current rating of the maximum short circuit that this drive can handle is 200,000 Amps RMS (symmetrical) for use with AC line fuses. The 1336F-A010-AN-EN-HCS2-L9E drive is approved by the CE standards for safe and reliable use in low voltage applications, and it is CE marked for its immunity and emissions ratings.