The Allen-Bradley/Rockwell Automation 1336F-A010-AX-EN910-L6 drive is a 1336 PLUS II series adjustable frequency drive that is intended to operate in applications where variable speed motors are used. The primary application for this drive is controlling the speed and torque of the variable speed motor that it is connected to so that the motor can operate smoothly without the risk of damage and wear and so that it can consistently deliver the required application results. This drive can be programmed from an external device or programmed locally since it comes with a control interface that operates with 115 Volts AC voltage. It also comes with an isolated configurable input and output that enable it to be connected to different devices. The Allen-Bradley/Rockwell Automation 1336F-A010-AX-EN910-L6 adjustable frequency drive operates with a voltage range of 200 to 240 Volts AC and a Horsepower output rating of 10 Horsepower. These specifications need to be fully compatible with the corresponding motor specifications.

The Allen-Bradley/Rockwell Automation 1336F-A010-AX-EN910-L6 1336 PLUS II series adjustable frequency drive comes with a roll-in type of chassis. When mounting this drive, it needs to have clearances on each side of it so that it can dissipate heat quickly and avoid overheating. This drive comes with 4 status indicators that are located in the main control board and these status indicators alert the users whenever there are power or voltage issues in the drive. The Allen-Bradley/Rockwell Automation 1336F-A010-AX-EN910-L6 adjustable frequency drive needs to be installed in a controlled and non-hazardous indoor environment where it can operate at its full power ratings and deliver its maximum efficiency level, which is 97.5 percent. The Allen-Bradley/Rockwell Automation 1336F-A010-AX-EN910-L6 adjustable frequency drive comes programmed in English. This means that the interfaces for the drive operate in English and that the drive’s user manual is printed in English too.