The Allen-Bradley 1336F-A020-AA-EN-GM6-HCS2-L6 drive is a 1336 Plus II series variable frequency drive. It is available in a C-sized frame and it is designed for vertical mounting. The IP 20 protection rating of the drive housing means that it has limited protection against solid particles and no protection against liquids. To improve the level of environmental protection, the drive can be mounted inside an industrial control panel cabinet. The HMI of the drive is located on the front panel and it is a programmer/controller HMI with a digital potentiometer. The 1336F-A020-AA-EN-GM6-HCS2-L6 drive HMI also supports uploads and downloads. The drive also features a built-in display screen and a keypad. The keypad can be used to configure the drive. The display allows for easy monitoring of the drive parameters. The 1336F-A020-AA-EN-GM6-HCS2-L6 drive comes with a 115 Volts AC rated control interface.

The Allen-Bradley 1336F-A020-AA-EN-GM6-HCS2-L6 1336 Plus II series drive features an enhanced DeviceNet communication module for communication with other devices. The input of the 1336F-A020-AA-EN-GM6-HCS2-L6 drive can be connected to a 3-phase AC mains that is rated at 200 to 240 Volts AC. Single-phase input can be used too, but it leads to 50% output derating. An input fuse or circuit breaker can be used to provide input short-circuit protection. The 1336F-A020-AA-EN-GM6-HCS2-L6 drive is meant to be used on 3-phase power supply systems with symmetrical line voltages. Surge suppression is included as an integrated protection feature to protect the drive from lightning-induced overvoltage between the line and ground. Allen-Bradley recommends the use of isolation transformers if there is a potential for abnormally high phase-to-ground voltages or if the ground is connected to another system that could cause the ground potential to vary.