Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-A020-AA-EN-HAS1-L6E

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-A020-AA-EN-HAS1-L6E

|
Need a Specific Revision?

The Allen-Bradley 1336F-A020-AA-EN-HAS1-L6E drive is a 1336 Plus II AC drive. It includes an integrated HMI. The output power rating of the 1336F-A020-AA-EN-HAS1-L6E drive is 20 Horsepower.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-A020-AA-EN-HAS1-L6E

ManufacturerAllen Bradley
Product TypeAC Drive
Product Line1336 PLUS II Drives
Part Number1336F-A020-AA-EN-HAS1-L6E
Weight50.00 lbs (22.68 kg)
Frame SizeC
Protection RatingIP 20
Mounting OrientationVertical
Input Voltage200 to 240 Volts AC
Output Power20 Horsepower
Operating Temperature0 to 40 degrees Celsius
Maximum Altitude1000 Meters
HMISupported
Control Interface115 Volts AC, Encoder Feedback
Request a Repair

The 1336F-A020-AA-EN-HAS1-L6E drive is an Allen-Bradley 1336 Plus II series drive. It is used for motor control in different kinds of industrial control applications. The maximum output power rating is 20 Horsepower or 15 kilowatts. The maximum rated output power is only available with 3-phase input voltage in a range between 200 and 240 Volts AC. The 1336F-A020-AA-EN-HAS1-L6E drive can be operated with single-phase input voltage too, but only with 50% derated output. The drive’s specifications are valid for altitudes that are between 0 and 1000 meters above sea level and ambient temperatures that are between 0 and 40 degrees Celsius. Operation of the 1336F-A020-AA-EN-HAS1-L6E drive outside the specified ambient conditions leads to output derating, and it can also cause drive failure. The drive supports an integrated HMI with a controller/programmer option. The control interface for the 1336F-A020-AA-EN-HAS1-L6E drive supports encoder feedback and 115 Volts AC rated voltage.

The enclosure of the Allen-Bradley 1336F-A020-AA-EN-HAS1-L6E 1336 Plus II drive is a NEMA Type 1 enclosure. The protection rating of the enclosure is IP 20. The drive should be cabinet mounted for additional protection. Allen-Bradley has designed the drive for vertical mounting and 4 mounting holes are available on the drive’s housing for easy installation. The HMI is located on the front panel of the drive and it includes a display and a keypad. The frame size of the 1336F-A020-AA-EN-HAS1-L6E drive is Size C. The nameplate for the drive is positioned on the mounting plate of the drive’s main control board. Only the recommended types of line fuses should be used for input protection on the 1336F-A020-AA-EN-HAS1-L6E drive. The minimum rating for dual-element time delay fuses is 100 Amps and the maximum rating is 110 Amps. The minimum rating for non-time delay fuses is 100 Amps and the maximum rating is 125 Amps. The maximum circuit breaker rating is 200 Amps and the maximum motor circuit protection rating is 100 Amps.