1336F-A020-AN-EN-HCS2-LA2

The Allen-Bradley 1336F-A020-AN-EN-HCS2-LA2 variable frequency drive is a 20 Horsepower rated 1336 PLUS II series variable frequency drive. The drive has modular architecture that enables it to adapt to a wide range of systems and applications. Multiple HMI options, communication modules, control interfaces, and analog interfaces can be ordered for the drive. The HMI option included with the drive is a programmer/controller HMI with a digital potentiometer. The 1336F-A020-AN-EN-HCS2-LA2 drive also includes 2 isolated analog inputs that are configurable. The language supported by the drive’s HMI is English. The power supply on the 1336F-A020-AN-EN-HCS2-LA2 variable frequency drive provides it with 200 to 240 Volts AC input voltage. The drive can work with single-phase and 3-phase AC power supplies, and the type of voltage will affect the output of the drive.

The output of the Allen-Bradley 1336F-A020-AN-EN-HCS2-LA2 1336 PLUS II variable frequency drive with 3-phase input voltage is 20 Horsepower. The output of the drive with single-phase input voltage is only 10 Horsepower. The drive output also derates if the ambient conditions differ from those that are specified by Allen-Bradley. The recommended ambient conditions include an operating temperature range of 0 to 50 degrees Celsius and an installation altitude of 0 to 1000 meters. Furthermore, the relative humidity levels should be less than 95% with no condensation. The open drive enclosure is IP 00 rated. This AC drive should only be used when it is installed inside a control cabinet for protection. The DC bus on the drive carries a nominal voltage rating of 324 Volts DC. The 1336F-A020-AN-EN-HCS2-LA2 drive is configured to shut off if the DC bus voltage levels reach 200 Volts DC or 405 Volts DC. Only trained technicians should install and work on the 1336F-A020-AN-EN-HCS2-LA2 drive.